Act now and download your Cisco 200-120 test today! Do not waste time for the worthless Cisco 200-120 tutorials. Download Updated Cisco CCNA Cisco Certified Network Associate CCNA (803) exam with real questions and answers and begin to learn Cisco 200-120 with a classic professional.

2021 Jul ccna 640-802 vs 200-120:

Q71. - (Topic 3) 

Which three are characteristics of an IPv6 anycast address? (Choose three.) 

A. one-to-many communication model 

B. one-to-nearest communication model 

C. any-to-many communication model D. a unique IPv6 address for each device in the group 

E. the same address for multiple devices in the group 

F. delivery of packets to the group interface that is closest to the sending device 

Answer: B,E,F 


Q72. - (Topic 7) 

A network administrator is troubleshooting the OSPF configuration of routers R1 and R2. The routers cannot establish an adjacency relationship on their common Ethernet link. 

The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2. Based on the information in the graphic, what is the cause of this problem? 

A. The OSPF area is not configured properly. 

B. The priority on R1 should be set higher. 

C. The cost on R1 should be set higher. 

D. The hello and dead timers are not configured properly. 

E. A backup designated router needs to be added to the network. 

F. The OSPF process ID numbers must match. 

Answer: D 


Q73. - (Topic 2) 

Which three of these statements regarding 802.1Q trunking are correct? (Choose three.) 

A. 802.1Q native VLAN frames are untagged by default. 

B. 802.1Q trunking ports can also be secure ports. 

C. 802.1Q trunks can use 10 Mb/s Ethernet interfaces. 

D. 802.1Q trunks require full-duplex, point-to-point connectivity. 

E. 802.1Q trunks should have native VLANs that are the same at both ends. 

Answer: A,C,E 


Q74. DRAG DROP - (Topic 4) 

Answer: 


Q75. CORRECT TEXT - (Topic 6) 

A network associate is adding security to the configuration of the Corp1 router. The user on host C should be able to use a web browser to access financial information from the Finance Web Server. No other hosts from the LAN nor the Core should be able to use a web browser to access this server. Since there are multiple resources for the corporation at this location including other resources on the Finance Web Server, all other traffic should be allowed. 

The task is to create and apply an access-list with no more than three statements that will allow ONLY host C web access to the Finance Web Server. No other hosts will have web access to the Finance Web Server. All other traffic is permitted. 

Access to the router CLI can be gained by clicking on the appropriate host. 

All passwords have been temporarily set to "cisco". The Core connection uses an IP address of 198.18.196.65 The computers in the Hosts LAN have been assigned addresses of 192.168.33.1 -

192.168.33.254 

Host A 192.168.33.1 

Host B 192.168.33.2 

Host C 192.168.33.3 

Host D 192.168.33.4 

The servers in the Server LAN have been assigned addresses of 172.22.242.17 -

172.22.242.30 

The Finance Web Server is assigned an IP address of 172.22.242.23. 

Answer: Select the console on Corp1 router Configuring ACL Corp1>enable Corp1#configure terminal comment: To permit only Host C (192.168.33.3){source addr} to access finance server address (172.22.242.23) {destination addr} on port number 80 (web) Corp1(config)#access-list 100 permit tcp host 192.168.33.3 host 172.22.242.23 eq 80 comment: To deny any source to access finance server address (172.22.242.23) {destination addr} on port number 80 (web) Corp1(config)#access-list 100 deny tcp any host 172.22.242.23 eq 80 comment: To permit ip protocol from any source to access any destination because of the implicit deny any any statement at the end of ACL. Corp1(config)#access-list 100 permit ip any any Applying the ACL on the Interface comment: Check show ip interface brief command to identify the interface type and number by checking the IP address configured. Corp1(config)#interface fa 0/1 If the ip address configured already is incorrect as well as the subnet mask. this should be corrected in order ACL to work type this commands at interface mode : no ip address 192.x.x.x 255.x.x.x (removes incorrect configured ipaddress and subnet mask) Configure Correct IP Address and subnet mask : ip address 172.22.242.30 255.255.255.240 ( range of address specified going to server is given as 172.22.242.17 - 172.22.242.30 ) Comment: Place the ACL to check for packets going outside the interface towards the finance web server. Corp1(config-if)#ip access-group 100 out Corp1(config-if)#end Important: To save your running config to startup before exit. Corp1#copy running-config startup-config Verifying the Configuration: Step1: show ip interface brief command identifies the interface on which to apply access list. Step2: Click on each host A, B, C, & D. Host opens a web browser page, Select address box of the web browser and type the ip address of finance web server (172.22.242.23) to test whether it permits /deny access to the finance web Server. Step 3: Only Host C (192.168.33.3) has access to the server. If the other host can also access then maybe something went wrong in your configuration. Check whether you configured correctly and in order. Step 4: If only Host C (192.168.33.3) can access the Finance Web Server you can click on NEXT button to successfully submit the ACL SIM. 


2passeasy.com

Far out testout 200-120:

Q76. - (Topic 5) 

Which three statements about Syslog utilization are true? (Choose three.) 

A. Utilizing Syslog improves network performance. 

B. The Syslog server automatically notifies the network administrator of network problems. 

C. A Syslog server provides the storage space necessary to store log files without using router disk space. 

D. There are more Syslog messages available within Cisco IOS than there are comparable SNMP trap messages. 

E. Enabling Syslog on a router automatically enables NTP for accurate time stamping. 

F. A Syslog server helps in aggregation of logs and alerts. 

Answer: C,D,F 


Q77. - (Topic 8) 

What are three reasons that an organization with multiple branch offices and roaming users might implement a Cisco VPN solution instead of point-to-point WAN links? (Choose three.) 

A. reduced cost 

B. better throughput 

C. broadband incompatibility 

D. increased security 

E. scalability 

F. reduced latency 

Answer: A,D,E 


Q78. - (Topic 4) 

A network administrator is trying to add a new router into an established OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers. Given the information in the partial configuration shown below, what configuration error is causing this problem? 

Router(config)# router ospf 1 

Router(config-router)# network 10.0.0.0 255.0.0.0 area 0 

A. The process id is configured improperly. 

B. The OSPF area is configured improperly. 

C. The network wildcard mask is configured improperly. 

D. The network number is configured improperly. 

E. The AS is configured improperly. 

F. The network subnet mask is configured improperly. 

Answer: C 


Q79. - (Topic 9) 

Which command sequence can you enter to create VLAN 20 and assign it to an interface on a switch? 

A. Switch(config)#vlan 20 Switch(config)#Interface gig x/y Switch(config-if)#switchport access vlan 20 

B. Switch(config)#Interface gig x/y Switch(config-if)#vlan 20 Switch(config-vlan)#switchport access vlan 20 

C. Switch(config)#vlan 20 Switch(config)#Interface vlan 20 Switch(config-if)#switchport trunk native vlan 20 

D. Switch(config)#vlan 20 Switch(config)#Interface vlan 20 Switch(config-if)#switchport access vlan 20 

E. Switch(config)#vlan 20 Switch(config)#Interface vlan 20 Switch(config-if)#switchport trunk allowed vlan 20 

Answer: A 


Q80. - (Topic 9) 

Which type of address is the public IP address of a NAT device? 

A. outside global 

B. outside local 

C. inside global 

D. inside local 

E. outside public 

F. inside public 

Answer: C