Act now and download your Cisco 200-120 test today! Do not waste time for the worthless Cisco 200-120 tutorials. Download Updated Cisco CCNA Cisco Certified Network Associate CCNA (803) exam with real questions and answers and begin to learn Cisco 200-120 with a classic professional.

2021 Oct free ccna 200-120 dumps:

Q11. - (Topic 6) 

When you are troubleshooting an ACL issue on a router, which command would you use to verify which interfaces are affected by the ACL? 

A. show ip access-lists 

B. show access-lists 

C. show interface 

D. show ip interface 

E. list ip interface 


Q12. - (Topic 3) 

You have been asked to come up with a subnet mask that will allow all three web servers to be on the same network while providing the maximum number of subnets. Which network address and subnet mask meet this requirement? 







Q13. - (Topic 7) 

What would be the effect of Issuing the command ip access-group 115 in on the s0/0/1 interface? 

. No host could connect to RouterC through s0/0/1. 

A. Telnet and ping would work but routing updates would fail. 

B. FTP, FTP-DATA, echo, and www would work but telnet would fail. 

C. Only traffic from the network would pass through the interface. 


Q14. - (Topic 5) 

What SNMP message alerts the manager to a condition on the network? 

A. response 

B. get 

C. trap 

D. capture 


Q15. - (Topic 9) 

Refer to the exhibit. 

What is the effect of the given configuration? 

A. It configures an inactive switch virtual interface. 

B. It configures an active management interface. 

C. It configures the native VLAN. 

D. It configures the default VLAN. 


Replace test 200-120:

Q16. - (Topic 9) 

If the primary root bridge experiences a power loss, which switch takes over? 

A. switch 0004.9A1A.C182 

B. switch 00E0.F90B.6BE3 

C. switch 00E0.F726.3DC6 

D. switch 0040.0BC0.90C5 


Q17. - (Topic 4) 

What are two enhancements that OSPFv3 supports over OSPFv2? (Choose two.) 

A. It requires the use of ARP. 

B. It can support multiple IPv6 subnets on a single link. 

C. It supports up to 2 instances of OSPFv3 over a common link. 

D. It routes over links rather than over networks. 

Answer: B,D 

Q18. - (Topic 2) 

Which two link protocols are used to carry multiple VLANs over a single link? (Choose two.) 


B. 802.1q 



E. 802.3u 

Answer: B,D 

Q19. - (Topic 6) 

How does using the service password-encryption command on a router provide additional security? 

A. by encrypting all passwords passing through the router 

B. by encrypting passwords in the plain text configuration file 

C. by requiring entry of encrypted passwords for access to the device 

D. by configuring an MD5 encrypted key to be used by routing protocols to validate routing exchanges 

E. by automatically suggesting encrypted passwords for use in configuring the router 


Q20. - (Topic 9) 

What is the first step in the NAT configuration process? 

A. Define inside and outside interfaces. 

B. Define public and private IP addresses. 

C. Define IP address pools. 

D. Define global and local interfaces.