Exam Code: 300 075 dump (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 300 075 ciptv2 Exam.

Q111. Refer to the exhibit. 

When a call between two HQ users is being conferenced with a remote user at BR, which configuration is needed? 

A. The BR_MRG must contain the transcoder device. The BR_MRGL must be assigned to the BR phones. 

B. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the HQ phones. 

C. A transcoder should be configured at the remote site and assigned to all remote phones through the BR_MRGL. 

D. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the software conference bridge. 

E. Enable the software conference bridge to support the G.711 and G.729 codecs in Cisco Unified Communications Manager Service Parameters. 

Answer:


Q112. Enabling authentication and encryption for CTI, JTAPI, and TAPI applications requires which two tasks? (Choose two.) 

A. Enter the encryption key into the application. 

B. Set up an IPsec association between the application and Cisco Unified CallManager. 

C. Configure related security parameters in the CTI, JTAPI, and TAPI application. 

D. Add the application user or end users to the Standard CTI Secure Connection user group, Standard CTI Allow Reception of SRTP Key Material user group, and Standard CTI Enabled user group. 

Answer: C,D 

Explanation: 

Incorrect Answer: A, B You must also add the application users or the end users to the Standard CTI Secure Connection user group in Cisco Unified Communications Manager Administration to enable TLS for the application. After you add the user to this group and install the certificate, the application ensures that the user connects via the TLS port. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/8_6_1/secugd/secucti.htm l#wp1166397 


Q113. Which two configurable options are available to enable Early Offer for calls over a Cisco Unified Communications Manager SIP trunk? (Choose two.) 

A. No Media Termination Point Required 

B. Media Termination Point Required 

C. Accept Audio Codec Preferences in Received Offer 

D. Early Offer support for voice and video calls Mandatory (insert MTP if needed) 

E. Use Trusted Relay Point 

Answer: B,D 


Q114. When using Cisco Unified Communications Manager Express in SRST mode, how many multicast music on hold streams can be utilized by the system at any given time? 

A. 3 

B. 6 

C. 2 

D. 4 

E. 1 

F. 5 

Answer:


Q115. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

Which device configuration option will allow an administrator to assign a device to specific rights for making calls to specific DNs? 

A. Media Resource Group List 

B. Device Pool 

C. Location 

D. AAR Group 

E. Calling Search Space 

Answer:

Explanation: 

A partition comprises a logical grouping of directory numbers (DNs) and route patterns with similar reachability characteristics. Devices that are typically placed in partitions include DNs and route patterns. These entities associate with DNs that users dial. For simplicity, partition names usually reflect their characteristics, such as "NYLongDistancePT," "NY911PT," and so on. A calling search space comprises an ordered list of partitions that users can look at before users are allowed to place a call. Calling search spaces determine the partitions that calling devices, including IP phones, softphones, and gateways, can search when attempting to complete a call. 


Q116. What impact do roaming-sensitive settings and Device Mobility settings have on call routing? 

A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS. 

B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS. 

C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS. 

D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS. 

Answer:


Q117. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications Manager, but is not registering properly. 

What is causing this failure? 

A. Device Pool cannot be default. 

B. The DX650 is the incorrect calling search space. 

C. The DX650 Phones does not support SIP. 

D. The location Hub_None has not been activated. 

E. The DX650’s MAC address is incorrect in the Cisco UCM. 

Answer:

Explanation: 

From the screen capture below we can see that the DX650 phone’s MAC address was incorrectly entered as D0C78914131D, not D0C78914132D. 


Q118. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.) 

A. RSVP can be enabled selectively between pairs of locations. 

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical 

configuration that is ignoring the physical topology. 

C. RSVP is topology aware, but only works with full mesh networks. 

D. An RSVP agent is a Media Termination Point that the call has to flow through. 

E. RSVP and RTP are used between the two endpoints. 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214 


Q119. Which action configures CAC utilizing only Cisco Unified Communications Manager software? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure Cisco Unified Communications Manager locations. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager MTPs. 

Answer:


Q120. When Cisco Extension Mobility is implemented, how is the audio source for the MOH selected? 

A. The audio source that is configured at the user device profile is selected. 

B. The audio source that is configured at the home phone of the user is selected. 

C. The audio source that is configured at the physical phone used for the Cisco Extension Mobility login is selected. 

D. The audio source that is configured in the IP Voice Media Streaming parameters is selected. 

Answer:

Explanation: 

Incorrect Answer: B, C, D To specify the audio source that plays when a user initiates a hold action, choose an audio source from the User Hold MOH Audio Source drop-down list box from device profile configuration settings. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06dvprf.html