Act now and download your Cisco 300 075 ciptv2 test today! Do not waste time for the worthless Cisco 300 075 pdf tutorials. Download Rebirth Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam with real questions and answers and begin to learn Cisco 300 075 vce with a classic professional.

Q11. The administrator at Company X is trying to set up Extension Mobility and has done these steps: 

-Set up end users accounts for the users who need to roam 

-Set up a device profile for the type of phones users will be allowed to log in Users have reported to the administrator that they are unable to log in to the phones 

designated for Extension Mobility. Which two options are the two reasons for this issue? (Choose two.) 

A. The user device profile is not associated to the correct end user. 

B. The username must be numeric only and must match the DN. 

C. The Extension Mobility service has not been enabled under the Cisco Unified Serviceability Page. 

D. Extension Mobility has not been enabled under Enterprise Parameters. 

E. The user must ensure that their main endpoint is online and registered, otherwise they cannot log in elsewhere. 

Answer: A,C 

Q12. Refer to the exhibit. 

Which statement about the configuration between the Default and BR regions is true? 

A. Calls between the two regions can use either 64 kbps or 8 kbps. 

B. Calls between the two regions can use only the G.729 codec. 

C. Only 64 kbps will be used between the two regions because the link is "lossy". 

D. Both codecs can be used depending on the loss statistics of the link. When lossy conditions are high, the G.711 codec will be used. 


Q13. Refer to the exhibit. 

With the Mobile Connect feature configured, when the PSTN phone calls the Enterprise user at extension 3001, the Enterprise user's mobile phone does not ring. Which CSS is responsible for ensuring that the correct partitions are accessed when calls are sent to the Enterprise user's mobile phone? 

A. the gateway CSS 

B. the Phone Device CSS 

C. the Remote Destination Profile CSS 

D. the Remote Destination Profile Rerouting CSS 

E. the Phone Line (DN)CSS 



Incorrect Answer: A, B, C, E 

Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space. Link: .html 

Q14. Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate external calls, VCS Expressway is deployed and traversal server zone is set up there. Video endpoints inside Company X have registered but are unable to receive calls from outside endpoints. Which option could be the cause of this issue? 

A. The access control list on the VCS Control must be updated with the IP for the external users. 

B. When a traversal zone is set up on VCS Control only outbound calls are possible. 

C. The local zone on the VCS Control does not have a search rule configured. 

D. The traversal zone on the VCS Control does not have a search rule configured. 


Q15. Which three tests can you perform to verify redundancy in the customer environment? (Choose three.) 

A. Verify that all phones are registered to a second subscriber server. 

B. Verify that media resources fail over to a secondary subscriber server when the publisher fails. 

C. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected. 

D. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers. 

E. Verify that the H.323 redundant connection is active. 

F. Verify that SCCP fallback is configured in Cisco Unified Communications Manager. 

Answer: A,B,C 

Q16. When an H.323 trunk is added for Call Control Discovery, which statement is true? 

A. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The Enable SAF check box should be selected in the trunk configuration. 

B. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The Trunk Service Type should be Call Control Discovery. 

C. The H.323 trunk is added by selecting Call Control Discovery Trunk and then selecting 

H.323 as the protocol to be used. 

D. The H.323 trunk is added by selecting H.323 Trunk, and selecting Inter-Cluster Trunk as the Device Protocol. The destination IP address field is configured as ‘SAF’ to indicate that this trunk is used for SAF. 



Reference. Implementing Cisco Unified Communications Manager Part 2 (CIPT2), Chapter3: Implementing Multisite Connections, pg 70-71, Fig 3-14 and Fig 3-15 

Q17. Which command displays the detailed configuration of all the Cisco Unified IP phones, voice ports, and dial peers of the Cisco Unified SRST router? 

A. show call-manager-fallback all 

B. show dial-peer voice summary 

C. show ephone summary 

D. show voice port summary 


Q18. Refer to the exhibit. 

How does the Cisco Unified Communications Manager advertise dn-block 1? 

A. 4XXX and the ToDID will 0: 

B. 4XXX and the ToDID will 0:1972555 

C. 4XXX 

D. 4XXX and the ToDID will 0:+ 1972555 

E. 19725554XXX 


Q19. Which statement is correct about AAR? 

A. The end users see, "Network Congestion Rerouting?" but AAR is otherwise transparent to the end user and works without user intervention. 

B. AAR will display "not enough bandwidth" on the IP phone while it reroutes the call. 

C. AAR allows calls to be rerouted because of insufficient Cisco Unified Border Element controlled bandwidth to an ITSP. 

D. AAR allows calls to be rerouted due to insufficient gatekeeper controlled IP WAN bandwidth. 



Incorrect Answer: B, C, D Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. Link: ml 

Q20. Which two features require or may require configuring a SIP trunk? (Choose two.) 

A. SIP gateway 

B. Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified Communications Manager Express 

C. Cisco Device Mobility 

D. Cisco Unified Mobility 

E. registering a SIP phone 

Answer: A,B 


Incorrect Answer: C, D, E All protocols require that either a signaling interface (trunk) or a gateway be created to accept and originate calls. Device mobility allows Cisco Unified Communications Manager to determine whether the phone is at its home location or at a roaming location. Cisco Unified Mobility gives users the ability to redirect incoming IP calls from Cisco Unified Communications Manager to different designated phones, such as cellular phones. Link: wpxref77849