Our pass rate is high to 98.9% and the similarity percentage between our 300 075 ciptv2 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 075 vce exam in just one try? I am currently studying for the Cisco 300 075 dump exam. Latest Cisco 300 075 dump Test exam practice questions and answers, Try Cisco cisco 300 075 Brain Dumps First.
Q81. Which two configurations can you perform to allow Cisco Unified Communications Manager SIP trunks to send an offer in the INVITE? (Choose two.)
A. Enable the Media Termination Point Required option on the SIP trunk.
B. Enable the Early Offer Support for Voice and Video Calls option on the SIP profile.
C. Select the Display IE Delivery check box in the gateway configuration.
D. Select the Enable Inbound FastStart check box on the Cisco Unified Communications Manager servers.
E. Select the SRTP Allowed check box on the SIP trunk.
F. Execute the isdn switch-type primary-ni command globally.
Q82. Which two actions are performed by the Call Control Discovery service after the local Cisco Unified Communications Manager loses its TCP connection with the primary and secondary Service Advertisement Framework? (Choose two.)
A. Calls are routed to the PSTN gateway after the Call Control Discovery Learned Pattern IP Reachable Duration parameter expires.
B. All learned patterns are purged from the local cache after the Call Control Discovery PSTN Failover Duration parameter expires.
C. The Service Advertisement Framework forwarder contacts all the remaining Service Advertisement Framework forwarders in the cluster.
D. All the remaining Service Advertisement Framework forwarders are notified for their learned patterns.
E. The Cisco Unified Communications Manager establishes a connection with the primary and secondary Service Advertisement Framework after the Learned Pattern IP Reachable Duration parameter expires.
F. Call Control Discovery immediately redirects all the calls to the PSTN gateway based on the learned patterns.
Q83. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager?
A. to allow for supplementary services such as hold, transfer, and conferencing
B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server
C. when you need the ability to grow support by using DSPs
D. when you want to only use Cisco Unified Communications Manager resources
Q84. Which E.164 transformation pattern represents phone numbers in Germany?
Q85. Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)
A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses.
C. Create one neighbor zone in VCS for each Unified CM node.
D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node.
Q86. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?
A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.
B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.
C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.
D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.
Incorrect Answer: A, B, D calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +. Link:
Q87. Where do you specify the device mobility group and physical location after they have been configured?
C. device mobility CSS
D. device pool
Incorrect Answer: A, B, C, E Before you configure a device pool, you must configure the following items if you want to choose them for the device pool, Cisco Unified Communications Manager group (required), Date/time group (required). Region (required) , SRST reference (optional). Media resource group list (optional), Calling search space for auto-registration (optional). Reverted call focus priority (optional), Device mobility group (optional), Device mobility calling search space, Physical location (optional). Location, AAR group. AAR calling search space. Link:
Q88. Which of the following are two functions that ensure that the telephony capabilities stay operational in the remote location Cisco Unified SRST router? (Choose two)
A. Automatically detecting a failure in the network.
B. Initiating a process to provide call-processing backup redundancy.
C. Notifying the administrator of an issue for manual intervention.
D. Proactively repairing issues in the voice network.
Q89. In which two locations can you verify that a phone has a standby Cisco Unified Communications Manager? (Choose two.)
B. phone menu
C. Cisco Unified Serviceability
D. phone webpage
Q90. Refer to the exhibit.
The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.
What should the AAR group prefix be?