Exam Code: 300-075 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 300-075 Exam.

2021 Jun 300-075 Study Guide Questions:

Q111. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.) 

A. RSVP can be enabled selectively between pairs of locations. 

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical 

configuration that is ignoring the physical topology. 

C. RSVP is topology aware, but only works with full mesh networks. 

D. An RSVP agent is a Media Termination Point that the call has to flow through. 

E. RSVP and RTP are used between the two endpoints. 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214 


Q112. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 


DX650 Configuration 


MRGL 


DP 


Locations 


AARG 


CSS 


Movi Failure 


Movi Settings 


What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.) 

A. Incorrect username and password 

B. Wrong SIP domain configured. 

C. User is not associated with the device. 

D. IP or DNS name resolution issue. 

E. CSF Device is not registered. 

F. IP Phone DN not associated with the user. 

Answer: B,D 


Q113. Which action configures the registration of transcoder resources? 

A. Cisco IOS software registers transcoder resources with SIP. 

B. Cisco IOS software registers transcoder resources with SCCP. 

C. Cisco IOS software registers transcoder resources with H.323. 

D. Cisco IOS software does not register transcoder resources. 

Answer: B 


2passeasy.com

Down to date 300-075 test question:

Q114. Which two locations are the best locations that an end user can use to determine if an IP phone is working in SRST mode? (Choose two.) 

A. Cisco Unified Communications Manager Administration 

B. IP phone display 

C. Cisco Unified SRST Router 

D. Cisco Unified MGCP Fallback Router 

E. physical IP phone settings 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D IP Phone display and Physical phone IP settings are two locations were an end user can determine if an IP phone is working in SRST mode. Link: http://my.safaribooksonline.com/book/telephony/1587050757/survivable-remote-site-telephony-srst/529 


Q115. Which two options are valid service parameter settings that are used to set up proper video QoS behavior across the Cisco Unified Communications Manager infrastructure? (Choose two.) 

A. DSCP for Video Calls when RSVP Fails 

B. Default Intraregion Min Video Call Bit Rate (Includes Audio) 

C. Default Interregion Max Video Call Bit Rate (Includes Audio) 

D. DSCP for Video Signaling 

E. DSCP for Video Signaling when RSVP Fails 

Answer: A,C 


Q116. In a node-specific Service Advertisement Framework forwarder deployment model, what is the maximum number of Service Advertisement Framework forwarders that you can assign to a specific node? 

A. 1 

B. 2 

C. 3 

D. 4 

E. 5 

F. 6 

Answer: B 


2passeasy.com

Real 300-075 training tools:

Q117. Refer to the exhibit. 



Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1. 

How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups? 

A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number. 

B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice. 

C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway. 

D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number. 

Answer: A 

Explanation: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html #wpxref46617 


Q118. You are entering the description for the Service Advertisement Framework forwarder. 

Which three characters should you avoid entering in the description? (Choose three.) 

A. < > 

B. & 

C. % 

D. # 

E. $ 

F. @ 

Answer: A,B,C 


Q119. How is the region assigned to a device such as an IP phone? 

A. Regions are assigned directly in the device configuration page. 

B. Regions can be assigned only through a device pool. 

C. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device pool region configuration takes precedence. 

D. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device region configuration takes precedence. 

Answer: B 


Q120. Video calls using 384 kbps need to be supported across a gatekeeper-controlled trunk. What value should be entered into the gatekeeper to support this bandwidth? 

A. 768 kbps 

B. 384 kbps 

C. 512 kbps 

D. 192 kbps 

Answer: B 

Explanation: 

Incorrect Answer: A, C, D A 384-kb/s video call may comprise G.711 at 64 kb/s (for audio) plus 320 kb/s (for video). This sum does not include overhead. If the audio codec for a video call is G.729 (at 24 kb/s), the video rate increases to maintain a total bandwidth of 384 kb/s. Link: 

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08video.html#wp1059726