Proper study guides for Replace Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certified begins with Cisco 300-075 preparation products which designed to deliver the Realistic 300-075 questions by making you pass the 300-075 test at your first time. Try the free 300-075 demo right now.

2021 Apr 300-075 exam fees

Q111. Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server? 

A. ccm-manager switchover-to-backup 

B. mgcp use backup 

C. ccm-manager register backup 

D. not supported 

Answer:


Q112. Refer to the exhibit. 

Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site? 

A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.Use the local gateway at each site. Prefix the appropriate site code for the calling number. 

B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number. 

C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

Answer:


Q113. In a node-specific Service Advertisement Framework forwarder deployment model, what is the maximum number of Service Advertisement Framework forwarders that you can assign to a specific node? 

A. 1 

B. 2 

C. 3 

D. 4 

E. 5 

F. 6 

Answer:


Q114. This is the configuration on the voice gateway: 

telephony-service 

max-ephones 30 

max-dn 60 preference 0 

srst mode auto-provision all 

srst dn line-mode dual 

srst dn template 3 srst ephone description 

srst fallback auto-provision phone 

srst ephone template 5 

Which ephone-dn would be expected upon activation of SRST? 

A. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones 

B. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones 

C. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones 

D. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones 

Answer:


Q115. Which two configurations provide the best SIP trunk redundancy with Cisco Unified Communications Manager? (Choose two.) 

A. Configure all SIP trunks with DNS SRV 

B. Configure all SIP trunks with Cisco Unified Border Element 

C. Configure all SIP trunks to point to a SIP gateway 

D. Configure SIP trunks to be members of route groups and route lists 

E. Configure all SIP trunks to allow TCP ports 5060 

F. Configure all SIP trunks to point to a gatekeeper through SIP to H.323 gateway 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C, E, F For SIP trunks, Cisco Unified Communications Manager supports up to 16 IP addresses for each DNS SRV and up to 10 IP addresses for each DNS host name. The order of the IP addresses depends on the DNS response and may be identical in each DNS query. The OPTIONS request may go to a different set of remote destinations each time if a DNS SRV record (configured on the SIP trunk) resolves to more than 16 IP addresses, or if a host name (configured on the SIP trunk) resolves to more than 10 IP addresses. Thus, the status of a SIP trunk may change because of a change in the way a DNS query gets resolved, not because of any change in the status of any of the remote destinations. 

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08sip.html 


Renovate 300-075 testing engine:

Q116. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones? 

A. Configure the branch office IP phones with CSS and partitions. 

B. Configure the branch office IP phones with MRGs and MRGLs. 

C. Configure the branch office IP phones with regions. 

D. Configure the branch office IP phones with locations. 

Answer:


Q117. Assume that local route groups are configured. When an IP phone moves from one device mobility group to another, which two configuration components are not changed? (Choose two.) 

A. IP subnet 

B. user settings 

C. SRST reference 

D. region 

E. phone button settings 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D Although the phone may have moved from one subnet to another, the physical location and associated services have not changed. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsdevmob.html#wp1137460 


Q118. Which option indicates the best QoS parameters for interactive video? 

A. 1% Max Loss, 150 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning 

B. 5% Max Loss, 5 s One-way Latency, 30 ms Jitter, 20% Overprovisioning 

C. 0% Max Loss, 100 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning 

D. 1% Max Loss, 160 ms One-way Latency, 60 ms Jitter, 10% Overprovisioning 

Answer:


Q119. How is the region assigned to a device such as an IP phone? 

A. Regions are assigned directly in the device configuration page. 

B. Regions can be assigned only through a device pool. 

C. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device pool region configuration takes precedence. 

D. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device region configuration takes precedence. 

Answer:


Q120. Which Cisco IOS command is used to verify that a SAF Forwarder that is registered with Cisco Unified Communications Manager has established neighbor relations with an adjacent SAF Forwarder? 

A. show eigrp service-family ipv4 neighbors 

B. show eigrp address-family ipv4 neighbors 

C. show voice saf dndball 

D. show saf neighbors 

E. show ip saf neighbors 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E 

Router# show eigrp service-family ipv4 4453 neighbors 

Link: http://www.cisco.com/en/US/docs/ios/saf/command/reference/saf_s1.html