It is more faster and easier to pass the Cisco 300 075 pdf exam by using Download Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) questuins and answers. Immediate access to the Up to the minute 300 075 vce Exam and find the same core area 300 075 ciptv2 questions with professionally verified answers, then PASS your exam with a high score now.
Q11. The relationship between a Region and a Location is that the Region codec parameter is used between a Region and its configured Locations.
Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link Link:
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can’t make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure?
A. Wrong username and/or password.
B. Wrong SIP domain name.
C. The TMSPE is not working.
D. The bandwidth is incorrectly configured.
Q13. Which option configures the secondary dial tone option for SRST mode to let the users hear the dial tone for PSTN calls?
A. voice service voipsecondary dialtone 0
B. call-manager-fallbacksecondary dialtone 0
C. dial-peer voice 1 potssecondary dialtone 0
D. ccm-manager secondary dialtone 0
Q14. Refer to the exhibit.
Which trunks would be most suitable for Connection Y?
A. an H.225 trunk (gatekeeper-controlled)
B. intercluster trunk (gatekeeper-controlled)
C. a SIP trunk on the U.S. cluster and an intercluster trunk on the remote cluster
D. intercluster trunk (nongatekeeper-controlled)
E. No extra connections are required. As long as IP connectivity exists, you need only configure a route pattern for each site. The Cisco Unified Communications Manager will automatically forward the calls over the WAN if the destination directory number is not registered locally.
Q15. What impact do roaming-sensitive settings and Device Mobility settings have on call routing?
A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS.
B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS.
C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS.
D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS.
Q16. Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure?
A. SRST with MGCP fallback
B. SRST without MGCP fallback
C. Cisco Unified Communications Manager Express in SRST mode
D. SRST with VoIP dial peers to Cisco Unified Communications Manager Express
Q17. Refer to the exhibit.
If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two.)
A. The physical locations are not different, so the configuration of the phone is not modified.
B. The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied.
C. The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters.
D. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm.
E. The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming-sensitive settings of the phone.
Q18. Refer to the exhibit.
IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.)
A. Add port 1/0:23 to dial-peer voice 123 pots.
B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4.
C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All).
D. Add the command h323-gateway voip id on interface vlan120.
E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4.
Incorrect Answer: A, C, D Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06trunk.html
Q19. Which configuration command disables the secondary dial tone on the branch office ISR for users calling from the PSTN into the branch office during a WAN failure?
B. voice translation-rule
C. incoming called-number
Q20. If the device pool in the phone record does not match the device pools in the matching subnet, what will the system consider the phone to be?
D. new device