100% Guarantee of 300 075 dump testing engine materials and courses for Cisco certification for IT professionals, Real Success Guaranteed with Updated 300 075 ciptv2 pdf dumps vce Materials. 100% PASS Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam Today!
Q71. When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?
A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Q72. When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41?
A. Set QoS mode to DiffServ and tag value 32.
B. Set QoS mode to IntServ and tag value to 34.
C. Set QoS mode to DiffServ and tag value 34.
D. Set QoS mode to IntServ and tag value to 32.
E. Set QoS mode to ToS and tag value to 32.
Q73. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager?
A. to allow for supplementary services such as hold, transfer, and conferencing
B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server
C. when you need the ability to grow support by using DSPs
D. when you want to only use Cisco Unified Communications Manager resources
Q74. The corporate WAN has been extended to two newly acquired sites and it includes gatekeeper support. Each site has a Cisco CallManager and an H.323 gateway that allows connection to the PSTN. Which connection method is best for these two new customers?
A. H.225 trunk (gatekeeper-controlled)
B. intercluster trunk (non-gatekeeper controlled)
C. SIP trunk
D. intercluster trunk (gatekeeper-controlled)
Q75. A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway. What should the gateway type be?
A. H.323 gateway
B. Cisco 3825
C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected.
D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router.
E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router.
Q76. Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. To match the US-TEHO pattern +!, how should the translation pattern be configured?
A. 9001.4085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +
B. 9.0014085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1
C. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1
D. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +
E. 001.4085551234 with the Called Party Transformation:Prefix Digits Outgoing Calls: +
Incorrect Answer: A, B, C The PSTN access code for the UK is 9, International call code is 001, The international escape character, +, signifies the international access code in a complete E.164 number format Link: http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03r p.html
Q77. Refer to the exhibit.
When a call between two HQ users is being conferenced with a remote user at BR, which configuration is needed?
A. The BR_MRG must contain the transcoder device. The BR_MRGL must be assigned to the BR phones.
B. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the HQ phones.
C. A transcoder should be configured at the remote site and assigned to all remote phones through the BR_MRGL.
D. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the software conference bridge.
E. Enable the software conference bridge to support the G.711 and G.729 codecs in Cisco Unified Communications Manager Service Parameters.
Q78. Enabling authentication and encryption for CTI, JTAPI, and TAPI applications requires which two tasks? (Choose two.)
A. Enter the encryption key into the application.
B. Set up an IPsec association between the application and Cisco Unified CallManager.
C. Configure related security parameters in the CTI, JTAPI, and TAPI application.
D. Add the application user or end users to the Standard CTI Secure Connection user group, Standard CTI Allow Reception of SRTP Key Material user group, and Standard CTI Enabled user group.
Incorrect Answer: A, B You must also add the application users or the end users to the Standard CTI Secure Connection user group in Cisco Unified Communications Manager Administration to enable TLS for the application. After you add the user to this group and install the certificate, the application ensures that the user connects via the TLS port. Link:
Q79. Refer to the exhibit.
Assume a centralized Cisco Unified Communications deployment with the headquarters in the U.K, and remote site in RTP. All route patterns are assigned a route list that points to the local route group. Local route groups have been configured on the U.K and RTP device pools. A U.K. user logs onto an RTP phone using the Cisco Extension Mobility feature and places an emergency call to 0000. Which statement about the emergency call is true?
A. The call will match the U.K_Emergency route pattern partition and will egress at the RTP gateway.
B. The call will match the U.K_Emergency route pattern partition and will egress at the U.K. gateway.
C. The call will match the RTP_Emergency route pattern partition and will egress at the U.K. gateway.
D. The call will match the RTP_Emergency route pattern partition and will egress at the RTP gateway.
E. The call will fail.
Q80. Refer to the exhibit.
The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.
What should the AAR group prefix be?