Ucertify 300-080 Troubleshooting Cisco IP Telephony and Video practice test would be the most suitable choice that you should plan for the particular Cisco test. In order to be a prominent Ucertify technical engineers, you cant pass by the particular Ucertify 300-080 Troubleshooting Cisco IP Telephony and Video materials provision. One can learn not merely the real 300-080 test questions and also the detailed reason. Passing Cisco 300-080 certification is the very first most important thing, moreover, you can learn numerous specialised knowledge and encounters which will used in the way forward for practice work.

2021 Jan 300-080 exam engine

Q21. Refer to Exhibit: After reviewing the trace in the exhibit, what was the Directory number of the called party? 

A. 2001 

B. 5010 

C. 1905 

D. 2003 

Answer:


Q22. Refer to topology and Exhibits below: From the perspective of the Cisco Unified Communications Manager, what is the status of the MGCP gateway? 

A. registered 

B. unknown 

C. registering 

D. initializing 

Answer:


Q23. When parsing trace output after the call routing decision and path selection have been made, which two records can be found in the CCM|RouteList? (Choose two.) 

A. PretransfromDigitString 

B. CallingPartyNumber 

C. PretransformCallingPartyNumber 

D. RouteListName 

E. findLocalDevice 

F. RouteListCdrc : 

Answer: D,F 


Q24. Refer to the exhibit. 

Users are reporting that inbound calls from the PSTN are dropping when not answered within 10 seconds. Calls come in via ISDN T1 PRI..Which configuration change is needed to prevent the calls from dropping? 

A. Remove the timeouts wait-release 10 command from under the voice-port. 

B. Remove the timeouts initial 10 command from under the voice-port. 

C. Remove the timer receive-rtcp 2 command from under the gateway. 

D. Remove the timer receive-rtp 10000 command from under the gateway. 

E. Modify the Call Forward No Answer setting in CUCM to redirect calls to Voicemail or another extension. 

Answer:


Q25. Which command is used on an IOS Router.that is.acting as a SAF Forwarder to confirm its registration status with a SAF Client? 

A. show ip asf-forwarder status details 

B. show ospf neighbor details 

C. show ip interface details 

D. show cdp neighbor details 

E. show eigrp service-family ipv4 clients details 

F. show service-family asf-forwarder details 

Answer:


Latest 300-080 practice test:

Q26. Cisco Unified Communications Manager failed to register with the Cisco SAF Forwarder. Assuming that the Cisco IOS SAF Forwarder is configured correctly, which minimum configuration would be needed on Cisco Unified Communications Manager to test registration? 

A. SAF trunk, SAF security profile, Cisco SAF Forwarder, and CCD advertising service 

B. SAF trunk, SAF security profile, Cisco SAF Forwarder, and CCD requesting service 

C. SAF trunk, SAF security profile, Cisco SAF Forwarder, CCD requesting service, and CCD advertising service 

D. SAF trunk, SAF security profile, and Cisco SAF Forwarder 

E. SAF trunk, CCD requesting service, and CCD advertising service 

Answer:


Q27. When a user attempts to log out from Cisco Extension Mobility service by pressing the services button and selecting the Cisco Extension Mobility service, the user is not able to log out. What is causing this issue? 

A. The Cisco Extension Mobility service has not been configured on the phone. 

B. The user device profile is not subscribed to the Cisco Extension Mobility service. 

C. The CTI service is not running. 

D. The logout URL that is defined for the Cisco Extension Mobility service is incorrect or does not exist under the IP Phone Services configuration. 

Answer:


Q28. Refer to the exhibit. 

When the user tried to configure the command maximum sessions 5 under the dspfarm profile 1, the error shown in the exhibit was reported. Which course of action will resolve this issue? 

A. The maximum conference-participants value must be configured >0. 

B. Ensure that the conference bridge is not registered in Cisco Unified Communications Manager. 

C. The command dsp services dspfarm must be configured under the voice-card configuration. 

D. Configure the dspfarm all command under the voice card. 

Answer:


Q29. Which statement indicates something that can cause an inbound PSTN call to an H.323 gateway that is configured in Cisco Unified Communications Manager to fail to ring an IP phone? 

A. The gateway is not registered in Cisco Unified Communications Manager. 

B. The gateway IP address that is configured in Cisco Unified Communications Manager does not match the IP address that is configured at the gateway in the h323-gateway voip bind srcaddr command. 

C. The Cisco Unified Communications Manager does not have a matching route pattern to match the called number. 

D. The gateway is missing the command allow-connections h323 to h323 under the voice service voip configuration. 

Answer:


Q30. When a user tries to initiate an Ad Hoc conference call from an IP phone, this message appears: No Conference Bridge Available. Which two actions resolve this issue? (Choose two.) 

A. Make sure that the Join softkey is assigned to the phone. 

B. Make sure that a Conference Bridge resource is registered to Cisco Unified Communications Manager. 

C. Reset the phone, to re-register resources. 

D. Make sure that a Conference Bridge Resource is assigned to the MRGL on the phone that initiates the conference call. 

Answer: B,D