Its never an effortless and fast way to obtain through the Cisco exam without having any help. Many candidates seek Cisco 300-206 on the internet training program for help. Its of an great help for those who are busy about work. Even so, choose the right Cisco 300-206 exam dumps which in turn with high quality and great benefit is difficult. Currently, I advise you the reliable website-Examcollection. It can be an optimal choice in your case to make preparation to the Cisco 300-206 exam. Just spend a little funds, you will obtain access to all the Cisco Cisco exam questions and answers. Cisco 300-206 exam dumps are the combination regarding all the simulated practice questions which can appear on the actual 300-206 real exam. The particular Examcollection Cisco 300-206 exam questions and answers are generally comprehensive, verified and guaranteed to pass your 300-206 real exam.

2021 Oct 300-206 senss cbt:

Q131. Which set of commands creates a message list that includes all severity 2 (critical) messages on a Cisco security device? 

A. logging list critical_messages level 2 

console logging critical_messages 

B. logging list critical_messages level 2 

logging console critical_messages 

C. logging list critical_messages level 2 

logging console enable critical_messages 

D. logging list enable critical_messages level 2 

console logging critical_messages 

Answer: B 


Q132. Enabling what security mechanism can prevent an attacker from gaining network topology information from CDP via a man-in-the-middle attack? 

A. MACsec 

B. Flex VPN 

C. Control Plane Protection 

D. Dynamic Arp Inspection 

Answer: A 


Q133. Which two VPN types can you monitor and control with Cisco Prime Security Manager? (Choose two.) 

A. AnyConnect SSL 

B. site-to-site 

C. clientless SSL 

D. IPsec remote-access 

Answer: A,D 

Explanation: http://www.cisco.com/c/en/us/td/docs/security/asacx/9-1/user/guide/b_User_Guide_for_ASA_CX_and_PRSM_9_1.pdf 


Q134. CORRECT TEXT 

You are a network security engineer for the Secure-X network. You have been tasked with 

implementing dynamic network object NAT with PAT on a Cisco ASA. You must configure the Cisco ASA such that the source IP addresses of all internal hosts are translated to a single IP address (using different ports) when the internal hosts access the Internet. 

To successfully complete this activity, you must perform the following tasks: 

. Use the Cisco ASDM GUI on the Admin PC to configure dynamic network object NAT with PAT using the following parameters: 

. Network object name: Internal-Networks 

. IP subnet: 10.10.0.0/16 

. Translated IP address: 192.0.2.100 

. Source interface: inside 

. Destination interface: outside 

NOTE: The object (TRANSLATED-INSIDE-HOSTS) for this translated IP address has already been created for your use in this activity. 

NOTE: Not all ASDM screens are active for this exercise. 

NOTE: Login credentials are not needed for this simulation. 

. In the Cisco ASDM, display and view the auto-generated NAT rule. 

. From the Employee PC, generate traffic to SP-SRV by opening a browser and navigating to http://sp-srv.sp.public. 

. From the Guest PC, generate traffic to SP-SRV by opening a browser and navigating to http://sp-srv.sp.public. 

. At the CLI of the Cisco ASA, display your NAT configuration. You should see the configured policy and statistics for translated packets. 

. At the CLI of the Cisco ASA, display the translation table. You should see dynamic translations for the Employee PC and the Guest PC. Both inside IP addresses translate to the same IP address, but using different ports. 

You have completed this exercise when you have configured and successfully tested dynamic network object NAT with PAT. 





Answer: See the explanation for detailed answer to this sim question. 


Q135. Which two features does Cisco Security Manager provide? (Choose two.) 

A. Configuration and policy deployment before device discovery 

B. Health and performance monitoring 

C. Event management and alerting 

D. Command line menu for troubleshooting 

E. Ticketing management and tracking 

Answer: B,C 


Update 300-206 senss book:

Q136. If you disable PortFast on switch ports that are connected to a Cisco ASA and globally turn on BPDU filtering, what is the effect on the switch ports? 

A. The switch ports are prevented from going into an err-disable state if a BPDU is received. 

B. The switch ports are prevented from going into an err-disable state if a BPDU is sent. 

C. The switch ports are prevented from going into an err-disable state if a BPDU is received and sent. 

D. The switch ports are prevented from forming a trunk. 

Answer: C 


Q137. Which two router commands enable NetFlow on an interface? (Choose two.) 

A. ip flow ingress 

B. ip flow egress 

C. ip route-cache flow infer-fields 

D. ip flow ingress infer-fields 

E. ip flow-export version 9 

Answer: A,B 


Q138. In your role as network security administrator, you have installed syslog server software on a server whose IP address is 10.10.2.40. According to the exhibits, why isn’t the syslog server receiving any syslog messages? 





A. Logging is not enabled globally on the Cisco ASA. 

B. The syslog server has failed. 

C. There have not been any events with a severity level of seven. 

D. The Cisco ASA is not configured to log messages to the syslog server at that IP address. 

Answer: B 

Explanation: By process of elimination, we know that the other answers choices are not correct so that only leaves us with the server must have failed. We can see from the following screen shots, that events are being generated with severity level of debugging and below, The 10.10.2.40 IP address has been configured as a syslog server, and that logging has been enabled globally: 




\psfHome.TrashScreen Shot 2015-06-11 at 8.38.59 PM.png 


Q139. Which VTP mode supports private VLANs on a switch? 

A. transparent 

B. server 

C. client 

D. off 

Answer: A 


Q140. Which three commands can be used to harden a switch? (Choose three.) 

A. switch(config-if)# spanning-tree bpdufilter enable 

B. switch(config)# ip dhcp snooping 

C. switch(config)# errdisable recovery interval 900 

D. switch(config-if)# spanning-tree guard root 

E. switch(config-if)# spanning-tree bpduguard disable 

F. switch(config-if)# no cdp enable 

Answer: B,D,F