Master the ccnp security senss 300 206 official cert guide Implementing Cisco Edge Network Security Solutions content and be ready for exam day success quickly with this Actualtests 300 206 senss actual exam. We guarantee it!We make it a reality and give you real ccnp security senss 300 206 official cert guide questions in our Cisco 300 206 senss braindumps.Latest 100% VALID Cisco cisco 300 206 Exam Questions Dumps at below page. You can use our Cisco 300 206 dumps braindumps and pass your exam.

Q81. CORRECT TEXT 

You are a network security engineer for the Secure-X network. You have been tasked with 

implementing dynamic network object NAT with PAT on a Cisco ASA. You must configure the Cisco ASA such that the source IP addresses of all internal hosts are translated to a single IP address (using different ports) when the internal hosts access the Internet. 

To successfully complete this activity, you must perform the following tasks: 

. Use the Cisco ASDM GUI on the Admin PC to configure dynamic network object NAT with PAT using the following parameters: 

. Network object name: Internal-Networks 

. IP subnet: 10.10.0.0/16 

. Translated IP address: 192.0.2.100 

. Source interface: inside 

. Destination interface: outside 

NOTE: The object (TRANSLATED-INSIDE-HOSTS) for this translated IP address has already been created for your use in this activity. 

NOTE: Not all ASDM screens are active for this exercise. 

NOTE: Login credentials are not needed for this simulation. 

. In the Cisco ASDM, display and view the auto-generated NAT rule. 

. From the Employee PC, generate traffic to SP-SRV by opening a browser and navigating to http://sp-srv.sp.public. 

. From the Guest PC, generate traffic to SP-SRV by opening a browser and navigating to http://sp-srv.sp.public. 

. At the CLI of the Cisco ASA, display your NAT configuration. You should see the configured policy and statistics for translated packets. 

. At the CLI of the Cisco ASA, display the translation table. You should see dynamic translations for the Employee PC and the Guest PC. Both inside IP addresses translate to the same IP address, but using different ports. 

You have completed this exercise when you have configured and successfully tested dynamic network object NAT with PAT. 

Answer: See the explanation for detailed answer to this sim question. 


Q82. When you configure a Cisco firewall in multiple context mode, where do you allocate interfaces? 

A. in the system execution space 

B. in the admin context 

C. in a user-defined context 

D. in the global configuration 

Answer:


Q83. Which option describes the enhancements that SNMPv3 adds over 1 and 2 versions? 

A. Predefined events that generate message from the SNMP agent to the NMS 

B. Addition of authentication and privacy options 

C. Cleartext transmission of data between SNMP server and SNMP agent 

D. Addition of the ability to predefine events using traps 

E. Pooling of devices using GET-NEXT requests 

F. Use of the object identifier 

Answer:

Explanation: 

http://www.cisco.com/c/en/us/td/docs/ios/12_2/configfun/configuration/guide/ffun_c/fcf014.html 


Q84. Where do you apply a control plane service policy to implement Management Plane Protection on a Cisco router? 

A. Control-plane interface management 0/0 

B. Control-plane service policy 

C. Control-plane router 

D. Control-plane host 

Answer:

Explanation: http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/htsecmpp.html 


Q85. What is the default behavior of an access list on the Cisco ASA security appliance? 

A. It will permit or deny traffic based on the access-list criteria. 

B. It will permit or deny all traffic on a specified interface. 

C. An access group must be configured before the access list will take effect for traffic control. 

D. It will allow all traffic. 

Answer:


Q86. Which.URL downloads a copy of packet-capture named "security" residing on a Cisco ASA adaptive security appliance with IP 10.10.100.11? 

A. https://10.10.100.11/capture/security/pcap 

B. https://10.10.100.11/capture/security.pcap 

C. https://10.10.100.11/security.pcap/download 

D. https://10.10.100.11/asa/security/pcap 

Answer:


Q87. What is the default behavior of NAT control on Cisco ASA Software Version 8.3? 

A. NAT control has been deprecated on Cisco ASA Software Version 8.3. 

B. It will prevent traffic from traversing from one enclave to the next without proper access configuration. 

C. It will allow traffic to traverse from one enclave to the next without proper access configuration. 

D. It will deny all traffic. 

Answer:


Q88. You are the administrator of a multicontext transparent-mode Cisco ASA that uses a shared interface that belongs to more than one context. Because the same interface will be used within all three contexts, which statement describes how you will ensure that return traffic will reach the correct context? 

A. Interfaces may not be shared between contexts in routed mode. 

B. Configure a unique MAC address per context with the no mac-address auto command. 

C. Configure a unique MAC address per context with the mac-address auto command. 

D. Use static routes on the Cisco ASA to ensure that traffic reaches the correct context. 

Answer:


Q89. Refer to the exhibit. 

Which option describes the expected result of the capture ACL? 

A. The capture is applied, but we cannot see any packets in the capture 

B. The capture does not get applied and we get an error about mixed policy. 

C. The capture is applied and we can see the packets in the capture 

D. The capture is not applied because we must have a host IP as the source 

Answer:


Q90. CORRECT TEXT 

Answer: Please check the steps in explanation part below: