It is impossible to pass Cisco 300-209 exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Cisco 300-209 practice questions. You will get a surprising result by our Improved Implementing Cisco Secure Mobility Solutions (SIMOS) practice guides.

2021 Jul 300-209 vce:

Q141. Which technology is FlexVPN based on? 

A. OER 

B. VRF 

C. IKEv2 

D. an RSA nonce 

Answer: C 


Q142. A user with IP address 10.10.10.10 is unable to access a HTTP website at IP address 

209.165.200.225 through a Cisco ASA. Which two features and commands will help troubleshoot the issue? (Choose two.) 

A. Capture user traffic using command capture capin interface inside match ip host 10.10.10.10 any 

B. After verifying that user traffic reaches the firewall using syslogs or captures, use packet tracer command packet-tracer input inside tcp 10.10.10.10 1234 209.165.200.225 80 

C. Enable logging at level 1 and check the syslogs using commands logging enable, logging buffered 1 and show logging | include 10.10.10.10 

D. Check if an access-list on the firewall is blocking the user by using command show running-config access-list | include 10.10.10.10 

E. Use packet tracer command packet-tracer input inside udp 0.10.10.10 1234192.168.1.3 161 to see what the firewall is doing with the user's traffic 

Answer: A,B 


Q143. Which statement is true when implementing a router with a dynamic public IP address in a crypto map based site-to-site VPN? 

A. The router must be configured with a dynamic crypto map. 

B. Certificates are always used for phase 1 authentication. 

C. The tunnel establishment will fail if the router is configured as a responder only. 

D. The router and the peer router must have NAT traversal enabled. 

Answer: C 


Q144. Refer to the exhibit. 


Which action is demonstrated by this debug output? 

A. NHRP initial registration by a spoke. 

B. NHRP registration acknowledgement by the hub. 

C. Disabling of the DMVPN tunnel interface. 

D. IPsec ISAKMP phase 1 negotiation. 

Answer: A 


2passeasy.com

Down to date 300-209 burner:

Q145. Which two are characteristics of GETVPN? (Choose two.) 

A. The IP header of the encrypted packet is preserved 

B. A key server is elected among all configured Group Members 

C. Unique encryption keys are computed for each Group Member 

D. The same key encryption and traffic encryption keys are distributed to all Group Members 

Answer: A,D 


Q146. CORRECT TEXT 

Scenario: 

You are the network security manager for your organization. Your manager has received a request to allow an external user to access to your HQ and DM2 servers. You are given the following connection parameters for this task. 

Using ASDM on the ASA, configure the parameters below and test your configuration by accessing the Guest PC. Not all AS DM screens are active for this exercise. Also, for this exercise, all changes are automatically applied to the ASA and you will not have to click APPLY to apply the changes manually. 

. Enable Clientless SSL VPN on the outside interface 

. Using the Guest PC, open an Internet Explorer window and test and verify the basic connection to the SSL VPN portal using address: https://vpn-secure-x.public 

. a. You may notice a certificate error in the status bar, this can be ignored for this exercise 

. b. Username: vpnuser 

. c. Password: cisco123 

. d. Logout of the portal once you have verified connectivity 

. Configure two bookmarks with the following parameters: 

. a. Bookmark List Name: MY-BOOKMARKS 

. b. Use the: URL with GET or POST method 

. c. Bookmark Title: HQ-Server 

. i. http://10.10.3.20 

. d. Bookmark Title: DMZ-Server-FTP 

. i. ftp://172.16.1.50 

. e. Assign the configured Bookmarks to: 

. i. DfltGrpPolicy 

. ii. DfltAccessPolicy 

. iii. LOCAL User: vpnuser 

. From the Guest PC, reconnect to the SSL VPN Portal 

. Test both configured Bookmarks to ensure desired connectivity 

You have completed this exercise when you have configured and successfully tested Clientless SSL VPN connectivity. 

Topology: 


Answer: Please find the solution in below explanation. 

Explanation: 

First, enable clientless VPN access on the outside interface by checking the box found below: 


Then, log in to the given URL using the vpnuser/cisco123 credentials: 


Logging in will take you to this page, which means you have now verified basic connectivity: 


Now log out by hitting the logout button. 

Now, go back to the ASDM and navigate to the Bookmarks portion: 


Make the name MY-BOOKMARKS and use the “Add” tab and add the bookmarks per the instructions: 


Ensure the “URL with GET of POST method” button is selected and hit OK: 


Add the two bookmarks as given in the instructions: 


You should now see the two bookmarks listed: 


Hit OK and you will see this: 


Select the MY-BOOKMARKS Bookmarks and click on the “Assign” button. Then, click on the appropriate check boxes as specified in the instructions and hit OK. 


After hitting OK, you will now see this: 


Then, go back to the Guest-PC, log back in and you should be able to test out the two new bookmarks. 


Q147. Refer to the exhibit. 


Which type of mismatch is causing the problem with the IPsec VPN tunnel? 

A. PSK 

B. Phase 1 policy 

C. transform set 

D. crypto access list 

Answer: A 


Q148. Which cryptographic algorithms are approved to protect Top Secret information? 

A. HIPPA DES 

B. AES-128 

C. RC4-128 

D. AES-256 

Answer: D 


Q149. Which statement about the hub in a DMVPN configuration with iBGP is true? 

A. It must be a route reflector client. 

B. It must redistribute EIGRP from the spokes. 

C. It must be in a different AS. 

D. It must be a route reflector. 

Answer: D