The Examcollection is among the productive servers that will provide the nearly all efficient along with original Cisco Cisco 300-209 training materials. You are able to find each of the important contents that can enable you to end up being well prepared for that Cisco 300-209 exam. The main purpose associated with Examcollection is to assist you to get a high mark that guarantees your own wonderful success. If you want to pass the Cisco 300-209 true test, use our Cisco exam preps with out wasting your period and money. The 300-209 practice supplies are created by our sophisticated IT professionals who have cutting-edge experience in making way up the Cisco certification exam dumps. Examcollection holds a distinctive place in the identical occupation. You can preserve faith in our Cisco 300-209 goods because many of us provide the best and newest Cisco training materials.

2021 Mar 300-209 free exam

Q41. CORRECT TEXT 

Answer: Here are the steps as below: 

Step 1: configure key ring 

crypto ikev2 keyring mykeys 

peer SiteB.cisco.com 

address 209.161.201.1 

pre-shared-key local $iteA 

pre-shared key remote $iteB 

Step 2: Configure IKEv2 profile 

Crypto ikev2 profile default 

identity local fqdn SiteA.cisco.com 

Match identity remote fqdn SiteB.cisco.com 

Authentication local pre-share 

Authentication remote pre-share 

Keyring local mykeys 

Step 3: Create the GRE Tunnel and apply profile 

crypto ipsec profile default 

set ikev2-profile default 

Interface tunnel 0 

ip address 10.1.1.1 255.255.255.0 

Tunnel source eth 0/0 

Tunnel destination 209.165.201.1 

tunnel protection ipsec profile default 

end 


Q42. Which statement is true when implementing a router with a dynamic public IP address in a crypto map based site-to-site VPN? 

A. The router must be configured with a dynamic crypto map. 

B. Certificates are always used for phase 1 authentication. 

C. The tunnel establishment will fail if the router is configured as a responder only. 

D. The router and the peer router must have NAT traversal enabled. 

Answer:


Q43. Which option is one component of a Public Key Infrastructure? 

A. the Registration Authority 

B. Active Directory 

C. RADIUS 

D. TACACS+ 

Answer:


Q44. A network is configured to allow clientless access to resources inside the network. Which feature must be enabled and configured to allow SSH applications to respond on the specified port 8889? 

A. auto applet download 

B. port forwarding 

C. web-type ACL 

D. HTTP proxy 

Answer:


Q45. Which protocol does DTLS use for its transport? 

A. TCP 

B. UDP 

C. IMAP 

D. DDE 

Answer:


Improved 300-209 torrent:

Q46. Which PKI enrollment method allows the user to separate authentication and enrollment actions and also provides an option to specify HTTP/TFTP commands to perform file retrieval from the server? 

A. enrollment profile 

B. enrollment terminal 

C. enrollment url 

D. enrollment selfsigned 

Answer:


Q47. Which option describes the purpose of the command show derived-config interface virtual-access 1? 

A. It verifies that the virtual access interface is cloned correctly with per-user attributes. 

B. It verifies that the virtual template created the tunnel interface. 

C. It verifies that the virtual access interface is of type Ethernet. 

D. It verifies that the virtual access interface is used to create the tunnel interface. 

Answer:


Q48. Which three configuration parameters are mandatory for an IKEv2 profile? (Choose three.) 

A. IKEv2 proposal 

B. local authentication method 

C. match identity or certificate 

D. IKEv2 policy 

E. PKI certificate authority 

F. remote authentication method 

G. IKEv2 profile description 

H. virtual template 

Answer: B,C,F 


Q49. Which two types of authentication are supported when you use Cisco ASDM to configure site-to-site IKEv2 with IPv6? (Choose two.) 

A. preshared key 

B. webAuth 

C. digital certificates 

D. XAUTH 

E. EAP 

Answer: A,C 


Q50. When Cisco ASA applies VPN permissions, what is the first set of attributes that it applies? 

A. dynamic access policy attributes 

B. group policy attributes 

C. connection profile attributes 

D. user attributes 

Answer: