Actualtests senior Cisco teachers and professionals can easily approve which Actualtests Cisco 300-370 test questions tend to be nearly appropriate. The pass fee associated with Troubleshooting Cisco Wireless Enterprise Network had been nearly 95 percent. Over al, we could show the 300-370 examine materials produced valuable reference regarding Cisco applicants. Our own 300-370 pdf well worth the examinees sparing without trying to study. It is possible to bet the boot you will have good result from the Actualtests Troubleshooting Cisco Wireless Enterprise Network exercise checks.
2021 Jan 300-370 free practice test
Q11. You have successfully configured HA and SSO using two Cisco 5508 Wireless LAN Controllers. You are able to access the Active Primary WLC but are unable to access the Secondary Standby WLC. Which two methods will allow you to access the standby unit? (Choose two.)
A. Via SSH to the Redundancy Management Interface.
B. Via Service Port Interface.
C. Via SSH to the Management Interface.
D. Via console connection.
Q12. An engineer is creating a custom rogue classification rule directly on a controller. Which two conditions are possible when adding a custom rule to a controller? (Choose two.)
B. ad hoc
F. open authentication
Q13. Employees upgraded company issued OS devices. Which are configured to authenticate to the network using WPA2-Eniefpnse 802 lx with LEAP As a result, the devices are no longer able to authenticate Which action must the engineer do 10 resolve the issue?
Refer to the exhibit.
A. Redeploy the existing configuration profile.
B. Change LEAP certificate on the ACS server.
C. Reset the network settings on the devices.
D. Rejoin the enterprise network manually.
E. Deploy a new configuration profile with LEAP enabled
Q14. An engineer is troubleshooting non-802 11 interference and observes this output. Which type of interference signatures can the engineer identify?
Refer to the exhibit.
B. DECT phone
Q15. Two 5508 Wireless Lan Controllers are managing all Access Points throughout the network The WLCs are located in different locations to provide geographical redundancy A Mobility Group has been configured on both WLCs and has a UP status on both Controllers The APs m location A are statically configured to use Controller A as the Primary and Controller B as the Secondary If the WLC in location A goes offline, the APs successfully join the WLC m location B but they do not failover to their Primary configured Controller What configuration task will fix this issue'
A. Change the AP Failover Priority to critical.
B. Enable AP Fallback globally on the WLC.
C. Configure the WLC in location A as Primary using the CAPWAP AP Controller IP Address command on all the location A Access Points.
D. Use DHCP Option 43 and specify WLC in location A as Primary.
Latest 300-370 test:
Q16. A network engineer has identified clients who are experiencing delays white roaming. The network is configured with WPA2-Enterpnse. AES encryption, 802 1X authentication, and Cisco Centralized Key Management Which change resolves the roaming delays?
A. Utilize a supplicant that supports Cisco Centralized Key Management."
B. Enable AES and TKIP encryption
C. Disable client session timeout
D. Install wireless device drivers from Cisco
Q17. An engineer has configured 802 1x for the network and all but one of the APs are passing authentication. Which configuration is causing the failure?
A. The AP has override global credentials checked.
B. The switch AAA credentials do not match what is configured on ISE.
C. The controller 802 1x supplicant credentials do not match what is configured on ISE
D. EAP-FAST is configured on ISE for this AP.
Q18. A wireless engineer is unable to join lightweight access points to the Cisco Wireless Controller. The access points receive ip addresses from a DHCP pool configured on the core switch. Which action must be taken to resolve the issue?
A. Upgrade the Wireless Controller to a newer IOS release.
B. Configure option 43 on the DHCP pool.
C. Configure option 82 on the Wireless controller.
D. Change the management ip address on the Wireless Controller.
Q19. Which two statements about the WLAN are true? (Choose two)
Refer to the exhibit.
A. The client has a 5 GHz connection.
B. The client has authenticated.
C. The client is 802.11n capable.
D. The Cisco device is a 3600 series AP.
E. 802 11b data rates are disabled in this WLAN
Q20. An engineer must open a support case with Cisco TAC. Which two commands verify the model and serial number of a controller? (Choose two)
A. show sysinfo
B. show udi
C. show inventory
D. show boot
E. show tech-support