It is more faster and easier to pass the Cisco 350-080 exam by using 100% Correct Cisco CCIE Data Center Written Exam questuins and answers. Immediate access to the Refresh 350-080 Exam and find the same core area 350-080 questions with professionally verified answers, then PASS your exam with a high score now.

2021 Jun actualtests 350-080:

Q221. When an NP port becomes operational, the NP switch first logs itself into the core switch by sending a FLOGI request (using the port WWN of the NP port). What will occur next?

A. The switch registers with the fabric name server.

B. The switch will perform a PLOGI to the port login server.

C. The switch will register parameters using FDISC.

D. The NPV switch will perform a PLOGI using FDISC to register with the fabric name server.

Answer: A

Q222. Which three are valid methods to monitor and trend SAN port channels with DCNM? (Choose three.)

A. use summary view in the device manager

B. from the DCNM-SAN client, view ISLs in real time from the Performance drop-down list

C. for each port channel, select Monitor Continually

D. configure traps for each port channel to utilize RMON

E. set up flows with the DCNM-SAN client and use the Performance Manager web client for performance collections

Answer: A,B,E

Q223. Which two options describe the results of a switch sending an RCF SW_ILS frame to neighbor switches? (Choose two.)

A. All traffic in all VSANs is suspended.

B. Zone merging is reinitiated.

C. The principal switch remains the same.

D. New Fibre Channel domains can be allocated.

E. The switch name is changed.

Answer: B,D



Q225. Cisco UCS Manager provides the ability to manage power utilization to the blades. Which two statements about UCS Manager power policies are true? (Choose two.)

A. Power capping helps mainly in reducing data center footprint.

B. Power capping helps reduce data center cooling.

C. A single power cap group policy allows you to set power limits across multiple UCS domains.

D. You can have multiple power cap groups per UCS domain.

E. Each blade within a UCS 5108 chassis can belong to a separate power cap group.

Answer: B,D

350-080  test questions

Abreast of the times 350-080 p4s:

Q226. Which four port types are included in the VLAN port count? (Choose four.)

A. border uplink Ethernet ports

B. border uplink EtherChannel member ports

C. FCoE ports in a SAN cloud

D. static and dynamic vNICs created through service profiles



G. Private VSANs

H. Private VLANs

Answer: A,B,C,D

Q227. How are IP multicast IGMP entries synchronized between vPC peers?

A. IGMP is not synchronized between vPC peers

B. Cisco Fabric Service carries IGMP entries across the vPC peer link

C. IP ARP synchronization under the vPC domain configuration also synchronizes IGMP

D. IGMP is flooded to the L2 domain, and there is no need to synchronize it between vPC peers

Answer: B

Q228. Nexus7000# config t

Nexus700(config)# interface thernet 2/11

Nexus700(config-if)# switchport mode private-vlan host

Nexus700(config-if)# switchport private-vlan host-association 14 50

Nexus700(config-if)# exit


What will this command sequence achieve?

A. associate interface E2/11 to community VLANs 14 and 50

B. associate interface E2/11 to secondary VLANs 14 and 50

C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14

D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50

Answer: D

Q229. A Cisco Application Control Engine Appliance (ACE) non-admin context does not support "sticky"

configuration. What is the reason for this issue?

A. ACE sticky license is not installed

B. ACE stickiness is not supported in a non-admin context

C. ACE stickiness resources are not defined in an admin context

D. Stickiness is configured properly in the CCIE virtual context

Answer: C

Q230. Refer to the exhibit.

On which of the interfaces can VLANs be configured or modified within this Cisco UCS domain?

A. VLANs can be configured or modified on all ports.

B. A, D, E, and F. Ports B and C are automatically configured by the fabric interconnect.

C. A, E, and F. Ports B, C, and D are automatically configured by the fabric interconnect.

D. A and F only. No other ports may have their VLAN configurations modified manually.

E. A only. VLANs are configured on uplinks and are automatically available on any other port with no configuration necessary.

F. F only. VLANs are only modified in the service profile.

Answer: D