Exam Code: 352-001 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: CCDE Written Exam
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 352-001 Exam.

2021 Jun 352-001 Study Guide Questions:

Q121. Which technique can you use to detect forwarding path failures at a uniform rate, and reconvergence times will be consistent and predictable when your routers are in the same broadcast domain? 

A. Enable BFD on your routers. 

B. Configure your routers with IP-SLA to ping the peer router. 

C. Configure your routers with IP-SLA and track to ping the peer and switch to a default route if the pings fail. 

D. Tune your routing protocol timers. 

Answer: A 

Q122. You are designing a network for a branch office. In order to improve convergence time, you are required to use the BFD feature. Which four routing protocols can you use to facilitate this? (Choose four.) 




D. static 


Answer: ABCD 

Q123. Refer to the exhibit. 

This diagram depicts the design of a small network that will run EIGRP on R1 and R2, and EIGRP Stub on R3. In which two ways will this network be impacted if there is link instability between R1 and R2? (Choose two.) 

A. R1 will have routes in its routing table that originate from R2 and R3. 

B. R3 will have routes in its routing table that originate from R1 and R2. 

C. R2 will have routes in its routing table that originate from R1 and R3. 

D. R3 will be transit for traffic between R1 and R2. 

E. R3 will not be transit for traffic between R1 and R2. 

Answer: BE 


Up to date cisco 352-001 vce:

Q124. Refer to the exhibit. 

What limitations exist in this design, given that the access layer devices are expected to steadily increase by two devices per week for the next year? 

A. scalability 

B. serviceability 

C. redundancy 

D. resiliency 

Answer: A 

Q125. Your design client has requested that you ensure that the client devices are not dynamically configured with incorrect DNS information. When finalizing the network design, which security option must be configured on the switches? 

A. IGMP snooping 

B. DHCP snooping 

C. root guard 

D. DNS snooping 

Answer: B 

Q126. Which mechanism should be added to a network design to identify unidirectional Spanning Tree Protocol failures through BPDU loss? 


B. loop guard 

C. BPDU guard? 

D. root guard 

Answer: B 


Real 352-001 braindump:

Q127. When network summaries are created for access networks in a network design, how does it change the behavior of the Shortest Path First (SPF) running in a backbone area? 

A. There would be fewer incremental SPFs. 

B. There would be fewer partial SPFs. 

C. There would be fewer full SPFs. 

D. There would be no change with the SPFs. 

Answer: B 

Q128. A company wants to connect two data center sites using a hub-and-spoke design with 2000 remote sites. One design consideration is the requirement to transfer MPLS packets over the public Internet. In addition, one router at each site should be used, and the MPLS packets must be encapsulated inside IP packets because the public Internet cannot transfer native MPLS packets. Which feature can be used to simplify the network design? 

A. GET VPN can be used to encrypt the MPLS packets with IPsec. 

B. DMVPN can be used to build up GRE tunnels dynamically with MPLS encapsulation inside. 

C. L2TPv3 can be used to encapsulate the MPLS packets. 

D. Site-to-site IPsec without GRE can be used to encapsulate the MPLS packets. 

E. PPPoE can be used to encapsulate the MPLS packets. 

Answer: B 

Q129. Your design plan includes mutual redistribution of two OSPF networks at multiple locations, with connectivity to all locations in both networks. How is this accomplished without creating routing loops? 

A. Use route maps on the ASBRs to allow only internal routes to be redistributed. 

B. Use route maps on the ASBRs to allow internal and external routes to be redistributed. 

C. Use route maps on the ASBRs to set tags for redistributed routes. 

D. Use route maps on the ASBRs to filter routes with tags so they are not redistributed. 

Answer: D 

Q130. Refer to the exhibit. 

Which single design aspect should be configured on the ABRs to reduce the impact of WAN upgrades for spoke routers on the core of the network? 

A. route summarization 

B. stub area 

C. route filtering 

D. not-so-stubby area 

Answer: A