Many That aspirants are eager to get the Cisco Cisco certification. It can be a threshold towards a well-paid task. If you maintain a Cisco certification, you will hold the actual advantage over additional candidates in the task market. Nevertheless, passing the Cisco 352-001 exam is actually never an easy task without any help. Having advantage of the actual Cisco Cisco exam questions and answers which usually reflect the true exam at Ucertify, you will be set for the Cisco genuine test. It can be a faster and less difficult approach to prepare for the Cisco 352-001 exam by taking the Ucertifys training course. Many of us guarantee the success with first attempt.

2021 Mar 352-001 torrent

Q31. How should multiple OSPF areas be designed when deployed on a classic three-layer (core/distribution/access) network hierarchy? 

A. The OSPF flooding domain boundary should be at the edge of the core layer. 

B. The OSPF flooding domain boundary should be within the distribution layer. 

C. OSPF should generally be deployed in a three-layer domain hierarchy to align with the physical three-layer hierarchy. 

D. OSPF flooding domain boundaries should be placed with route aggregation in mind. 

Answer:


Q32. Refer to the exhibit. 

Your company designed a network to allow server VLANs in a data center to span all access switches. In the design, Layer 3 VLAN interfaces and HSRP are configured on the aggregation switches. In which three ways should the design of the STP domain be optimized for server and application performance? (Choose three.) 

A. Use loop guard on access ports. 

B. Use PortFast on access ports. 

C. Use root guard on access ports. 

D. Align Layer 2 and Layer 3 forwarding paths. 

E. Use BPDU Skew Detection on access ports. 

F. Explicitly determine root and backup root bridges. 

Answer: BDF 


Q33. Service provider XYZ plans to provide dedicated Internet access and MPLS L3VPN services to business customers. XYZ has these design specifications: 

.  MP-BGP running on the core MPLS P routers with external Internet routes. 

. The core network will include 16 Point of Presence IP POPs throughout the Asia-Pacific region. . An additional nine non-P routers will use EBGP peering with multiple providers for Internet traffic. . An additional 50 PE routers will provide end customers with dedicated Internet access and L3VPN services throughout the Asia-Pacific region. 

In what two ways can the MP-BGP be removed from the MPLS P core routers and still provide dedicated Internet access and MPLS L3VPN services? (Choose two.) 

A. Disable BGP from the MPLS core P routers and have the MPLS core P routers run OSPF and LDP. 

B. Enable separate BGP control plane routers using a route reflector server concept that will be fully meshed with peer route reflector servers and have clients as MPLS PE routers and EBGP peering routers. 

C. Enable all EBGP routers as route reflector servers and MPLS PE routers as their clients. 

D. It is not possible to disable BGP from the MPLS core P routers without impacting the dedicated Internet access and MPLS L3VPN services. 

Answer: BC 


Q34. You are designing the QoS features for a large enterprise network that includes DMVPN. When would you need to configure QoS preclassify? 

A. when you are marking packets with the DSCP bits 

B. when you are marking packets with the TOS bits 

C. when your service provider requires the DSCP bits be set 

D. when the QoS policy cannot be based on DSCP ToS bits 

Answer:


Q35. Refer to the exhibit. 

When designing an MPLS-based LAN extension between DC-1 and DC-2, what are three advantages of deploying VSS? (Choose three.) 

A. Layers 2, 3, and 4 flow-based load balancing 

B. native VSS and MEC failover without using scripts 

C. sub-second failover 

D. required to configure VPLS 

E. failover time depends on Cisco IOS EEM and STP convergence 

F. limited VLAN-based VPLS traffic hashing 

Answer: A,B,C 


Most recent 352-001 exam prep:

Q36. As part of a new network design, you are helping the Network Management Team to develop a proactive report to identify places in the network where problems may happen. The network management tool can poll the network devices only via SNMP GET operations. Which two threshold-crossing metrics should you include in this report? (Choose two.) 

A. packet loss 

B. CPU utilization 

C. heat dissipation 

D. IP reachability 

E. energy consumption 

F. link bandwidth utilization 

Answer: BF 


Q37. Refer to the exhibit. 

This new OSPF network has four areas, but the hub-and-spoke area experiences frequent flapping. You must fix this design failure. Which two mechanisms can you use to isolate the data center area from the hub-and-spoke area without losing IP connectivity? (Choose two.) 

A. Make the DC area totally stub. 

B. Make the DC area an NSSA. 

C. Convert the DC area to EIGRP protocol. 

D. Deploy a prefix summarization on router D. 

E. Use OSPF distribute-list filtering on router A. 

Answer: AD 


Q38. Your company plans to implement an Internet gateway router that is performing NAT. This same gateway will be terminating various IPsec tunnels to other remote sites. Which 

address type isappropriate for the ACL that will govern the sources of traffic entering the tunnel in the inside interface? 

A. inside local 

B. inside global 

C. outside local 

D. outside global 

Answer:


Q39. Which two design aspects should a metro service provider consider when planning to deploy REP for his backbone? (Choose two.) 

A. Two REP segments can be connected redundantly at two points, one connection will be blocked as per the STP defined in IEEE 802.1d. 

B. UDLD can be enabled on REP interfaces to detect unidirectional failures. 

C. The guaranteed convergence recovery time is less than 50 ms for the local segment. 

D. A REP segment is limited to a maximum of seven devices. 

E. VLAN load balancing for optimal bandwidth usage is supported in any REP segment. 

Answer: BE 


Q40. A data center provider has designed a network using these requirements: 

Two data center sites are connected to the public Internet. 

Both data centers are connected to different Internet providers. 

Both data centers are also directly connected with a private connection for the internal traffic, and public Internet traffic can also be routed at this direct connection. 

The data center provider has only one /19 public IP address block. 

Under normal conditions, Internet traffic should be routed directly to the data center where the services are located. When one Internet connection fails, the complete traffic for both data centers should be routed by using the remaining Internet connection. In which two ways can this routing be achieved? (Choose two.) 

A. The data center provider must have an additional public IP address block for this routing. 

B. One /20 block is used for the first data center and the second /20 block is used for the second data center. The /20 block from the local data center is sent out with a low BGP weight and the /20 block from the remote data center is sent out with a higher BGP weight at both sites. 

C. One /20 block is used for the first data center and the second /20 block is used for the second data center. The /20 block from the local data center is sent out without path prepending and the /20 block from the remote data center is sent out with path prepending at both sites. 

D. One /20 block is used for the first data center and the second /20 block is used for the second data center. Each /20 block is only sent out locally. The /19 block is sent out at both Internet connections for the backup case to reroute the traffic through the remaining Internet connection. 

E. One /20 block is used for the first data center and the second /20 block is used for the second data center. The /20 block from the local data center is sent out with a low BGP local preference and the /20 block from the remote data center is sent out with a higher BGP local preference at both sites. 

F. BGP will always load-balance the traffic to both data center sites. 

Answer: CD