We provide real 352-001 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 352-001 Exam quickly & easily. The 352-001 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 352-001 dumps pdf and vce product and material, you can easily pass the 352-001 exam.

Q71. Refer to the exhibit. 

After this new OSPF design with per-packet load balancing was implemented, Host A reported that large file downloads from Server A became slow and sometimes failed. The operations team discovered that packets are arriving out of order on R1. Which cost-conscious redesign action will fix the issue? 

A. Upgrade all links to 10 Gbps. 

B. Add an IP SLA probe on R1 and R4. 

C. Adjust the OSPF auto-cost reference bandwidth on R4. 

D. Adjust the OSPF auto-cost reference bandwidth on all routers. 

Answer:


Q72. Your customer asks you to assist with their traffic policy design. They want to guarantee a minimum amount of bandwidth to certain traffic classes. Which technique would you advise them to implement? 

A. Modular QoS CLI 

B. committed accessrRate 

C. policy-based routing 

D. traffic shaping 

Answer:


Q73. Which technique can you use to detect forwarding path failures at a uniform rate, and reconvergence times will be consistent and predictable when your routers are in the same broadcast domain? 

A. Enable BFD on your routers. 

B. Configure your routers with IP-SLA to ping the peer router. 

C. Configure your routers with IP-SLA and track to ping the peer and switch to a default route if the pings fail. 

D. Tune your routing protocol timers. 

Answer:


Q74. A Service Provider is designing a solution for a managed CE service to a number of local customers using a single CE platform and wants to have logical separation on the CE platform using Virtual Routing and Forwarding (VRF) based on IP address ranges or packet length. Which is the most scalable solution to provide this type of VRF Selection process on the CE edge device? 

A. Static Routes for Route Leaking 

B. Policy Based Routing 

C. Multi-Protocol BGP 

D. OSPF per VRF Instance 

Answer:


Q75. A company wants a design that would support OSPF through a service provider ATM network. Which two OSPF network types should the designer use to establish OSPF neighborship between OSPF routers through the ATM network? (Choose two.) 

A. A broadcast network will always work through ATM networks. 

B. A broadcast network will work when the broadcast support is explicitly configured at the ATM network. 

C. Explicit neighbor statements are required when a nonbroadcast network is configured. 

D. Explicit neighbor statements are required when a point-to-multipoint network is configured. 

E. A nonbroadcast network does not require DR selection. 

Answer: BC 


Q76. You are designing an Out of Band Cisco Network Admission Control, Layer 3 Real-IP Gateway deployment for a customer. Which VLAN must be trunked back to the Clean Access Server from the access switch? 

A. untrusted VLAN 

B. user VLAN 

C. management VLAN 

D. authentication VLAN 

Answer:


Q77. When creating a network design, which one of these options provides for basic Layer 2 client isolation to prevent broadcast traffic exposure? 

A. SVI 

B. VLAN 

C. routed port 

D. edge port 

Answer:


Q78. A multicast network is using bidirectional PIM. Which two actions, when combined, can achieve high availability so that two RPs within the same network can act in a redundant manner? (Choose two.) 

A. Use Anycast RP based on MSDP peering between the two RPs. 

B. Use a phantom RP address. 

C. Advertise routes for the two RPs with the same subnet mask through the unicast routing protocol. 

D. Advertise routes for the two RPs with different subnet mask lengths through the unicast routing protocol. 

E. Manipulate the administrative distance of the unicast routes to the two RPs. 

F. Manipulate the multicast routing table by creating static mroutes to the two RPs. 

Answer: BD 


Q79. Which multicast technology provides a large, many-to-many connectivity for a new application while minimizing load on the existing network infrastructure? 

A. Bidirectional PIM 

B. PIM Sparse Mode 

C. Any-source Multicast 

D. Source Specific Multicast 

Answer:


Q80. Which restriction prevents a designer from using a GDOI-based VPN to secure traffic that traverses the Internet? 

A. Enterprise host IP addresses are typically not routable. 

B. GDOI is less secure than traditional IPsec. 

C. Network address translation functions interfere with tunnel header preservation. 

D. The use of public addresses is not supported with GDOI. 

Answer: