Act now and download your Cisco 352-001 test today! Do not waste time for the worthless Cisco 352-001 tutorials. Download Update Cisco CCDE Written Exam exam with real questions and answers and begin to learn Cisco 352-001 with a classic professional.
Q121. A company supports IPv4 and IPv6 addresses, and they need to be able to support flow-based translations for multiple IPv6 devices to a single IPv4 address. Which address family translation design solution should be recommended?
A. stateful NAT-PT
C. stateless NAT64
D. stateful NAT64
Q122. You are performing a BGP design review for a service provider that offers MPLS-based services to their end customers. The network is comprised of several PE routers that run iBGP with a pair of route reflectors for all BGP address families. Which two options about the use of Constrained Route Distribution for BGP/MPLS VPNs are true? (Choose two.)
A. This feature must be enabled on all devices in the network at the same time.
B. The RR must advertise the default route target filter toward the PE routers.
C. The RRs do not need to advertise any route target filter toward the PE routers.
D. Both PE and RR routers must support this feature.
Q123. Refer to the exhibit.
Four customer sites are connected through an EoMPLS-based VPLS over an MPLS provider. You are migrating from OSPF to multi-level IS-IS as the routing protocol to run on the four CE routers, and connectivity between all four sites is required. You want to control which CE or CEs will be elected as the Designated Intermediate System. Which two key aspects should be taken into account? (Choose two.)
A. The DIS role for Level1 and Level2 can be performed by different routers.
B. The CE with the second highest priority will be elected as the backup DIS on the LAN segment.
C. One of the CE routers will be elected as the DIS based on interface priority then highest MAC address.
D. It is recommended to use point-to-point link type on the CEs.
E. If a new CE router is added to the VPLS cloud with a lower interface priority it will become the DIS.
Q124. Refer to the exhibit.
In this BGP design, what is the next hop for 10.1.1.0/24 on R8 and R7?
A. The next hop for 10.1.1.0/24 on R7 is R8 and the next hop for R8 is R7.
B. The next hop for 10.1.1.0/24 on R7 is R5 and the next hop for R8 is R6.
C. The next hop for 10.1.1.0/24 on R7 is R6 and the next hop for R8 is R5.
D. The next hop for 10.1.1.0/24 on R7 is R3 and the next hop for R8 is R4.
Q125. As part of the network design, ACME Corporation requires the ability to export IPv6 information to better manage its network. Which version of NetFlow records is required to export this information?
Q126. You are identifying performance management requirements for a VoIP migration. What three key performance indicators would you use to track media quality? (Choose three.)
B. trunk group usage
D. packet loss
E. call processing (call detail records)
F. call processing (performance counters)
Q127. You are evaluating convergence characteristics of various interior gateway protocols for a new network design. Which technology allows link-state routing protocols to calculate paths to destination prefixes that are functionally similar to feasible successors in Enhanced Interior Gateway Routing Protocol?
A. Incremental Shortest Path First
B. Cisco Multiprotocol Label Switching Traffic Engineering Fast Reroute
C. Loop-Free Alternate Fast Reroute
D. partial route calculation
Q128. You are designing a multisite VPN solution for a customer and you are concerned with the additional overhead of point-to-point tunnels and the associated overlay routing with DMVPN. How does a GDOI-based VPN eliminate the additional tunnel and routing overhead found in DMVPN?
A. The GDOI-based VPN requires overlaying a secondary routing infrastructure through the tunnels.
B. In a GDOI-based VPN, all group members share a common security association.
C. The GDOI-based VPN requires the provisioning of a complex connectivity mesh.
D. The GDOI-based VPN leverages the routing protocol to find its peer for tunnel setup.
Q129. A many-to-many enterprise messaging application is using multicast as a transport mechanism. As part of the network design for this application, which multicast address should be used, according to best practices outlined in RFC 2365?
Q130. What are two functions of an NSSA in an OSPF network design? (Choose two.)
A. It overcomes issues with suboptimal routing when there are multiple exit points from the area.
B. It allows ASBRs to inject external routing information into the area.
C. An ASBR advertises Type 7 LSAs into the area.
D. An ABR advertises Type 7 LSAs into the area.
E. It uses opaque LSAs.