Ucertify 400-051 CCIE Collaboration apply test would be the best option so that you can prepare for the actual Cisco test. If you want to be described as a preeminent Ucertify technicians, you can not pass up the actual Ucertify 400-051 CCIE Collaboration materials preventative measure. You can study not just the real 400-051 test questions and answers and also the comprehensive explanation. Passing Cisco 400-051 certification will be the very first most important thing, moreover, you can study numerous specific understanding and also experiences which will found in not able to apply work.

2021 Jun 400-051 ccie collaboration:

Q101. Refer to the exhibit. 


A user is going through a series of dialing steps on a SIP Type B IP phone (for example, a Cisco 7975) to call an SCCP IP phone. Both phones are registered to the same Cisco Unified Communications Manager cluster. Assuming the calling SIP phone is associated with a SIP Dial Rule with a pattern value of 2001, which statement about the call setup process of this call is true? 

A. Each digit will arrive at Cisco Unified Communications Manager in a SIP NOTIFY message as a KPML event, and Cisco Unified Communications Manager will extend the call as soon as the collected digits match the extension of the SCCP IP phone, bypassing class of service configuration on both IP phones. 

B. Each digit will arrive at Cisco Unified Communications Manager in a SIP NOTIFY message as a KPML event. When.the collected digits match the extension of the SCCP IP phone, Cisco Unified Communications Manager will extend the call only if the class of service configuration on both phones permits this action. 

C. As soon as the user selects the Dial softkey, the SIP IP phone will forward all digits to Cisco Unified Communications Manager in a SIP INVITE message. Cisco Unified Communications Manager will extend the call as soon as the collected digits match the extension of the SCCP IP phone, bypassing class of service configuration on both IP phones. 

D. As soon as the user selects the Dial softkey, the SIP IP phone will forward all digits to Cisco Unified Communications Manager in a SIP INVITE message. Cisco Unified Communications Manager will extend the call only if class of service configuration on both phones permits this action. 

E. The SIP IP phone will wait for the interdigit timer to expire, and then send all digits to Cisco Unified Communications Manager in a SIP INVITE message. Cisco Unified Communications Manager will extend the call as soon as the collected digits match the extension of the SCCP IP phone, bypassing class of service configuration on both IP phones. 

Answer: D 


Q102. Which two applications must be connected to a leaf cluster in a Cisco Unified Communications Manager Session Management Edition deployment? (Choose two.) 

A. Cisco Unified Meeting Place 

B. Cisco Unified Contact Center Express 

C. H.323-based video conferencing systems 

D. Cisco Unity 

E. Cisco Unified Communications Manager Attendant Console 

F. fax servers 

Answer: BE 


Q103. Which Call Control Discovery function allows the local Cisco Unified Communications Manager to listen for advertisements from remote call-control entities that use the SAF network? 

A. CCD advertising service 

B. CCD requesting service 

C. SAF forwarder 

D. SAF enabled trunks 

E. CCD registration service 

Answer: B 


Q104. Refer to the exhibit. 


In this high-availability Cisco IM and Presence deployment with three subclusters, the first user is assigned to server 1A; the second user is assigned to server 2A; and the third user is assigned to server 3A. Assume that Cisco IM and Presence is set to active-active mode. To which server will the fourth user be automatically assigned? 

A. 1A 

B. 3B 

C. 1B 

D. 2A 

E. 3A 

Answer: C 


Q105. Which Cisco Unified Contact Center Express data store contains CSQ information? 

A. configuration data store 

B. repository data store 

C. agent data store 

D. historical data store 

E. script data store 

Answer: A 


2passeasy.com

Improve 400-051 latest dumps:

Q106. In Cisco IOS routers, which chipset is the PVDM-12 DSP hardware based on? 

A. C542 

B. C549 

C. C5510 

D. C5421 

E. C5409 

Answer: B 


Q107. Which element was added to H.225 messages to enable Fast Connect in H.323 version 2? 

A. fastStart 

B. fastConnect 

C. H.245 PDU 

D. User-User Information 

E. Connection Information 

Answer: A 


Q108. Which statement about Cisco EnergyWise domain member neighbor formation is true? 

A. Cisco EnergyWise supports static neighbors, but the neighbor relationship is only possible.if a noncontiguous domain member and a contiguous domain member have a static neighbor entry pointing to each other. 

B. Cisco EnergyWise static neighbors can be formed even if domain members are not physically contiguous. 

C. Static neighbors can be manually defined on Cisco EnergyWise domain members, but TCP protocols must be used. 

D. Static neighbors can be manually defined on Cisco EnergyWise domain members, but they have a lower priority compared to the autodiscovered members. 

E. Static neighbors can be manually defined on Cisco EnergyWise domain members and the TCP or UDP protocol can be used. 

Answer: B 


Q109. Which two Cisco Unified Communications Manager SIP profile configuration parameters for a SIP intercluster trunk are mandatory to enable end-to-end RSVP SIP Preconditions between clusters? (Choose two.) 

A. Set the RSVP over SIP parameter to Local RSVP. 

B. Set the RSVP over SIP parameter to E2E. 

C. Set the SIP Rel1XX Options parameter to Disabled. 

D. Set the SIP Rel1XX Options parameter to Send PRACK If 1xx Contains SDP. 

E. Set the SIP Rel1XX Options parameter to Send PRACK for All 1xx Messages. 

F. Check the Fall Back to Local RSVP check box. 

Answer: BD 


Q110. In addition to SIP triggers, which two trigger types can invoke applications on Cisco Unity Express? (Choose two.) 

A. HTTP 

B. IMAP 

C. VoiceView 

D. JTAPI 

E. Cisco Unified CM telephony 

F. voice mail 

Answer: AD