Q41. Which two categories are state-based greetings on Cisco Unity Express? (Choose two.) 

A. Meeting 

B. Vacation 

C. Internal 

D. Closed 

E. Alternate 

F. Extended Absence 

Answer: CD 


Q42. Which statement about what happens to incoming calls to a Cisco Unified Communications Manager native call queue when no hunt members are logged in or registered is true? 

A. Calls are handled according to the Forward Hunt No Answer settings on the Hunt Pilot configuration page. 

B. Calls are handled according to the Not Available Hunt Option settings on the Line Group Configuration page. 

C. Calls are handled according to the Forward Hunt Busy settings on the Hunt Pilot configuration page. 

D. Calls are forward to the Forward Busy Calls To destination if configured; otherwise the calls are disconnected. 

E. Calls are handled according to the correspondent parameters under the Queuing section on the Hunt Pilot Configuration page. 

Answer:


Q43. Which method allows administrators to determine the best match impedance on analog voice ports in Cisco IOS router without having to shut and no shut the ports? 

A. THL tone sweep 

B. original tone sweep 

C. ECAN test 

D. inject-tone local sweep 

E. remote loop 

Answer:


Q44. Refer to the exhibit. 

How many inbound calls can be handled simultaneously between ephone 1 and ephone 2 before a user busy tone is returned? 

A. 6 

B. 7 

C. 8 

D. 9 

E. 11 

Answer:


Q45. In Key Press Markup Language, which SIP request is used to deliver the actual DTMF digits? 

A. SUBSCRIBE 

B. INFO 

C. NOTIFY 

D. INVITE 

E. ACK 

Answer:


Q46. Which digital modulation method is used to transmit caller ID information on analog FXS ports on Cisco IOS routers? 

A. DTMF 

B. PSK 

C. FSK 

D. MF 

E. pulse dialing 

Answer:


Q47. Which statement describes the question mark wildcard character in a SIP trigger that is configured on Cisco Unity Express? 

A. It matches any single digit in the range 0 through 9. 

B. It matches one or more digits in the range 0 through 9. 

C. It matches zero or more occurrences of the preceding digit or wildcard value. 

D. It matches one or more occurrences of the preceding digit or wildcard value. 

E. It matches any single digit in the range 0 through 9, when used within square brackets. 

Answer:


Q48. According to ITU-T E.164 recommendations, which two fields in the National Significant Number code may be further subdivided? (Choose two.) 

A. Country Code 

B. National Destination Code 

C. Subscriber Number 

D. Regional Significant Number 

E. Local User Code 

F. National Numbering Plan 

Answer: BC 


Q49. What is the amount of audio bandwidth, in kilobits per second, that is used in the Cisco Unified Communications Manager location bandwidth calculation for a G.728 call? 

A. 8 

B. 16 

C. 24 

D. 29 

E. 80 

Answer:


Q50. Refer to the exhibit. 

A user is performing a series of dialing steps on a SCCP IP phone (extension 1001) to call another SCCP IP phone (extension 2003). Both phones are registered to the same Cisco Unified Communications Manager cluster. 

Which user inputs are sent from the calling IP phone to the Cisco Unified Communications Manager, in the form of SCCP messages, after the user takes the phone off-hook? 

(The commas in the options are logical separators, not part of the actual user input or SCCP messages.) 

A. A separate SCCP message is sent to the Cisco Unified Communications Manager for each of these user inputs: 2, 0, 0, 3 

B. A separate SCCP message is sent to the Cisco Unified Communications Manager for each of these user inputs: 2, 0, 1, <<, 0, 3 

C. The IP phone collects all keypad and soft key events until user inputs stops, then it sends a single SCCP message to report that 2003 has been dialed. 

D. The IP phone collects all keypad and soft key events until user inputs stops, then it sends a single SCCP message to report that 201<<03 has been dialed. 

E. A separate SCCP message is sent to the Cisco Unified Communications Manager for each of these user inputs: 2, 0, 1, <<, 2, 0, 0, 3 

Answer: