Assessment Quantity: 400-101?
Affiliated Qualifications: Cisco
Available Different languages: English, Western, Japanese, How to speak spanish, Euro, Mandarin chinese, Dutch, Colonial
Assessment Term : CCIE Routing and Switching (v5.0)
Answers : [productnum] Q&As
Bring up to date Time frame: [productupdatetime]
Amount:? [productprice]

2021 Mar 400-101 practice exam

Q461. Which three options are results of the command no mpls ip propagate-ttl? (Choose three.) 

A. It prevents the TTL from being copied from the IP header to the MPLS header. 

B. It prevents the MPLS hops from being visible to a CE router when you perform a traceroute. 

C. A fixed TTL value of 255 is used for the first label of the IP packet. 

D. It prevents the TTL from being copied from the MPLS header back into the IP header. 

E. MPLS hops remain visible on a CE router when you perform a traceroute. 

F. A fixed TTL value of 1 is used for the first label of the IP packet. 

Answer: A,B,C 

Q462. Refer to the exhibit. 

Which configuration reduces CPU utilization on R2 while still advertising the connected routes of R2 to R1? 

A. Configure eigrp stub connected on R2. 

B. Configure eigrp stub receive-only on R1. 

C. Configure eigrp stub static on R2. 

D. Configure eigrp stub summary on R1. 


Q463. Which statement about LISP encapsulation in an EIGRP OTP implementation is true? 

A. OTP uses LISP encapsulation for dynamic multipoint tunneling. 

B. OTP maintains the LISP control plane. 

C. OTP uses LISP encapsulation to obtain routes from neighbors. 

D. LISP learns the next hop. 


Q464. Refer to the exhibit. 

If you change the Spanning Tree Protocol from pvst to rapid-pvst, what is the effect on the interface Fa0/1 port state? 

A. It transitions to the listening state, and then the forwarding state. 

B. It transitions to the learning state and then the forwarding state. 

C. It transitions to the blocking state, then the learning state, and then the forwarding state. 

D. It transitions to the blocking state and then the forwarding state. 



First, the port will transition to the blocking state, immediately upon the change, then it will transition to the new RSTP states of learning and forwarding. 

Port States 

There are only three port states left in RSTP that correspond to the three possible operational states. The 802.1D disabled, blocking, and listening states are merged into a unique 802.1w discarding state. 

STP (802.1D) Port State 

RSTP (802.1w) Port State 

Is Port Included in Active Topology? 

Is Port Learning MAC Addresses? 





















Q465. Which two statements are true about a 6to4 tunnel connecting two IPv6 islands over the IPv4 Internet? (Choose two.) 

A. It embeds the IPv6 packet into the IPv4 payload with the protocol type set to 51. 

B. It works by appending the private IPv4 address (converted into hexadecimal format) to the 2002::/16 prefix. 

C. It embeds the IPv6 packet into the IPv4 payload with the protocol type set to 41. 

D. It works by appending the public IPv4 address (converted into hexadecimal format) to the 2002::/16 prefix. 

Answer: C,D 


6to4 embeds an IPv6 packet in the payload portion of an IPv4 packet with protocol type 41. To send an IPv6 packet over an IPv4 network to a 6to4 destination address, an IPv4 

header with protocol type 41 is prepended to the IPv6 packet. The IPv4 destination address for the prepended packet header is derived from the IPv6 destination address of the inner packet (which is in the format of a 6to4 address), by extracting the 32 bits immediately following the IPv6 destination address's 2002::/16 prefix. The IPv4 source address in the prepended packet header is the IPv4 address of the host or router which is sending the packet over IPv4. The resulting IPv4 packet is then routed to its IPv4 destination address just like any other IPv4 packet. 


Replace 400-101 training:

Q466. Which EIGRP packet types are sent as unicast packets? 

A. hello, update, query 

B. query, SIA query, reply 

C. SIA query, reply, ACK 

D. query, SIA query, SIA reply 


Q467. On which three options can Cisco PfR base its traffic routing? (Choose three.) 

A. Time of day 

B. An access list with permit or deny statements 

C. Load-balancing requirements 

D. Network performance 

E. User-defined link capacity thresholds 

F. Router IOS version 

Answer: C,D,E 


Key Advantages of using PfR for Load balancing: 

. Utilization based load-balancing: PfR takes real-time link utilization into account when load balancing the links. This will ensure that a link will not go beyond a certain percentage of its maximum capacity (75% by default). 

. Application Performance based Load Balancing: PfR does not randomly forward traffic through one link or another. It takes application performance requirements into consideration and then forwards the traffic through a link which meets the performance policy requirements. PfR also load balances the link at the same time. 

. Bi-directional Solution: PfR is a bi-directional load balancing solution which influences outbound as well as in-bound traffic. 

. Consolidated Centralized View: PfR offers consolidated and centralized view of the state of all external links in the network. At any given time, the network administrator can see the current link utilization (in kbps and percentage of its capacity), maximum link threshold, and the policies applied to the links in the network. 


Q468. Refer to the exhibit. 

Which statement about this GET VPN configuration is true? 

A. Router 1 acts as the primary key server because it has a higher priority. 

B. An RSA key has been imported into the configuration. 

C. The GDOI group configuration generated a key. 

D. DPD is disabled. 


Q469. Which two statements about the default router settings for SSH connections are true? (Choose two.) 

A. The default timeout value for the SSH negotiation phase is 120 seconds. 

B. Data is exchanged in clear text by default unless AAA authentication is enabled on the console. 

C. The default number of authentication retries is 3. 

D. SSH is enabled by default when you configure the username command. 

Answer: A,C 


ip ssh {timeout seconds | authentication-retries number} 

Configures the SSH control parameters: 

. Specify the time-out value in seconds; the default is 120 seconds. The range is 0 to 120 seconds. This parameter applies to the SSH negotiation phase. After the connection is established, the Switch uses the default time-out values of the CLI-based sessions. By default, up to five simultaneous, encrypted SSH connections for multiple CLI-based sessions over the network are available (session 0 to session 4). After the execution shell starts, the CLI-based session time-out value returns to the default of 10 minutes. 

. Specify the number of times that a client can re-authenticate to the server. The default is 3; the range is 0 to 5. 

Reference: ity/configuration_guide/b_sec_3se_3850_cg/b_sec_3se_3850_cg_chapter_01000.html 

Q470. On a broadcast interface, which two OSPF states support BFD sessions? (Choose two.) 

A. DR 



D. 2WAY 



Answer: A,B