we provide Virtual Cisco 400-351 vce which are the best for clearing 400-351 test, and to get certified by Cisco CCIE Wireless Written Exam. The 400-351 Questions & Answers covers all the knowledge points of the real 400-351 exam. Crack your Cisco 400-351 Exam with latest dumps, guaranteed!

Q21. 802.11k and 802.11k-enabled client devices send a request for a list of neighbor APs (a neighbor list) from the APs they are currently associated with. What is this 802.11management frame also known as? 

A. association response 

B. association packet 

C. beacon frame 

D. action packet 


Q22. Your customer wants to configure LSCs and asks for specific information about which number to configure in the text box right next to the "Number of Attempts" 

.Which statement is true? 

A. The default number of attempts is 100. 

B. A value of 2 means that if an AP fails to join the Cisco WLC using an LSC, the AP attempts to Join the Cisco WLC using the default certificate 

C. A value of 255 means that if an AP fails to join the Cisco WLC using an LSC, the AP does not attempt to join the Cisco WLC using the default . 

D. A value of 3 means that if a user fails to authenticate, the user is disconnected after three retries. 


Q23. Why would you enable the RFC 3578 option when adding a new RADIUS authentication server to a WLC? 

A. you want to run both RADIUS and TACACS 

B. to support Disconnect and Change of Authorization 

C. to encrypt communications between the WLC and the RADIUS server 

D. to support RADIUS key wrapping 



If you are configuring a new RADIUS authentication server, choose Enabled from the Support for RFC 3576 drop-down list to enable RFC 3576, which is an extension to the RADIUS protocol that allows dynamic changes to a user session, or choose Disabled to disable this feature. The default value is Enabled. RFC 3576 includes support for disconnecting users and changing authorizations applicable to a user session and supports disconnect and change-of-authorization (CoA) messages. Disconnect messages cause a user session to be terminated immediately where CoA messages modify session authorization attributes such as data filters. 

Q24. Your customer plans to deploy a location-aware WLAN in a campus.which statements about the planning considera tion for location-aware WLAN are true ? 

(Choose two) 

A. Cisco PI allow as APS that are defined equipped with third-party antennas participate in client tag or rogue on demand location tracking 

B. Perimeter APs should complement APs located w1thin floor intenor areas m add1 t1on APs should be place m each of the four corners of the floor and at any other corner that are encountered along the floor perimeters. 

C. Onsite calibration is require otherwise location tracking for clients cannot be performed 

D. At least one AP are resident in each quadrant that surrounds the pomt-in- QUESTION NO: 

E. At least one AP that resides in each of at least three of the surrounding quadrant IS located within 70feet(-21.3meters) of the point-in- QUESTION NO: 

F. active RFID tags transmit directly to the APs and require 802.11authentication and require 802.11 authentication and association to pass data traffic to the realtime locating. 

Answer: C, E 

Q25. which two types of interface events are common for cleanAir?(choose two) 

A. Microwave interference 

B. Co-channel interference 

C. Spontaneous interference 

D. Persistent mterference 

Answer: C, D 

Q26. Exhibit 

A. The "Client Session" report 802.11and security statics 

B. The "Client Count" report d1splay the total number of active clients on the network 

C. The "Busiest Clients" report dose include autonomous clients 

D. The "Client Count" report include clients to autonomous c1sco ISO APs. 

Answer: B, D 

Q27. What two statements are true with regards to the UNII brands? (Choose two) 

A. All channels in the UNII-2 band require DFS and TPC 

B. The UNII-3 band provides channel that ate spaced 20 MHz apart 

C. The channels in UNII-3 band require DFS and TPC 

D. The UNII-1band provides 4 non-overlapping channels 

E. Different channels within the UNII-1band have different restrictions including transmit power antenna gain antenna style usage 

Answer: A, D 

Q28. Which two Characteristic of U-APSD are true ?(Chosse two) 

A. U-APSD is enabled automatically when WMM is enabled 

B. In addition to extending battery life, U-APSD increases the latency of the traffic flow delivered over the wireless media 

C. U-APSD is configured on the access point switch port and supports the Power over Ethernet feature D. (Unscheduled automatic power save delivery) U-APSD is a Qos facility defined in IEEE 802.11e that extends the battery life of mobile clients 

Answer: A, D 

Q29. An autonomous AP is configured with the infrastructure –client command. What is this command used for? 

A. to allow more than 20 client associations 

B. to send reliable multicast traffic 

C. to enable multiple VLANs to cross the bridge link 

D. to allow only infrastructure device associations 


Q30. Which three statements about 802.11ac are true? (choose three) 

A. MU-MIMO is supported in wave 1 

B. MU-MIMO allows one AP to transmit unique data to multiple stations simultaneously 

C. when using MU-MIMI up to 8 devices can transmit data at the same time 

D. 802.11 a/b/g/n device are able to connect to 802.11ac radios 

E. it IS possible to reach 160 MHz by combining two discontinuous 80 MHz channel block 

F. 802.11 ac is supported in the 2.4- and 5-Ghz radio band 

Answer: B, D, E