It is impossible to pass Cisco 600-210 exam without any help in the short term. Come to Examcollection soon and find the most advanced, correct and guaranteed Cisco 600-210 practice questions. You will get a surprising result by our Replace Implementing Cisco Service Provider Mobility UMTS Networks (SPUMTS) practice guides.

2021 Jan 600-210 exam cost

Q31. How does an S4-SGSN identify a peer node as an SGSN or MME when GUTI-to-RAI mapping is unavailable? 

A. MSB of the LAC value 

B. MSB of the RAC value 

C. LSB of the LAC value 

D. LSB of RAC value 

Answer:


Q32. In which two ways does SGSN detect and know when GGSN has restarted? (Choose two.) 

A. change in recovery value in echo response 

B. change in recovery value in PDU notification request from GGSN to SGSN 

C. change in recovery value in Update PDP Context Request from GGSN to SGSN 

D. when the sequence number in a response message is different from that of the request message 

E. when the TEID value in response in GTP header is different from that of the request message 

Answer: A,C 


Q33. What two routing keys can be used to filter SS7 messages? (Choose two.) 

A. DPC 

B. DPC [+SSN] 

C. IMEI 

D. MSISDN 

E. IMEISV 

Answer: A,B 


Q34. Your company is adding additional subscriber IP network ranges and requires many-to-one NAT to be configured on the Cisco ASR 5000 for the subscriber IP network 10.11.23.0/24. The public IP range is 172.20.21.20 172.20.21.110, and each IP has no more than 100 subscribers. 

Which configuration option accomplishes this task? 

A. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.110 napt-users-per-ip-address 100 

B. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.0.0/16 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.110 napt-users-per-ip-address 1000 

C. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 nat-and-pat policy nat_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.29 napt-users-per-ip-address 100 

D. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.29 napt-users-per-ip-address 100 

Answer:


Refresh 600-210 practice exam:

Q35. In which two ways is GRE used in GGSN? (Choose two.) 

A. to transport the subscriber traffic between MS and GGSN 

B. to transport AAA packets between GGSN and the service provider RADIUS server 

C. to transport AAA packets between GGSN and the corporate RADIUS server 

D. to transport the enterprise subscriber packets to the corporate gateway 

E. to transport the enterprise subscriber packets to the Internet 

Answer: C,D 


Q36. Which option is the page response for a PS paging request in 2G access? 

A. service request with type "data" 

B. service request with type "page response" 

C. any uplink LLC PDU from MS/BSC 

D. any uplink BSSGP PDU from MS/BSC 

E. service request with type "signaling" 

Answer:


Q37. Which two functions does the SGSN perform? (Choose two.) 

A. mobility management 

B. charging 

C. dynamic IP address allocation to a subscriber 

D. dynamic policy control 

E. deep packet inspection 

Answer: A,B 


Q38. Your company wants to limit bandwidth for Skype traffic. You have been tasked to configure Application Detection and Control using the Cisco ASR 5000 to detect Skype traffic for all subscribers. If Skype traffic is detected, limit the uplink and downlink data rate to 32 kb/s. 

Which required configuration is needed to complete this task? 

A. active-charging service ACS_ACME p2p-detection protocol skype ruledef skype_detection p2p protocol = skype exit charging-action skype_rate_limit content-id 1500 flow limit-for-bandwidth direction downlink peak-data-rate 32000 peak-burst- 8000 violate-action discard flow limit-for-bandwidth direction uplink peak-data-rate 32000 peak-burst- 8000 violate-action discard rulebase acme_rulebase action priority 1000 ruledef skype_detection charging-action skype_rate_limit 

B. active-charging service ACS_ACME ruledef skype_detection p2p protocol = skype exit charging-action skype_rate_limit content-id 1500 flow limit-for-bandwidth direction downlink peak-data-rate 16000 peak-burst- 8000 violate-action discard flow limit-for-bandwidth direction uplink peak-data-rate 16000 peak-burst- 8000 violate-action discard rulebase acme_rulebase action priority 32000 ruledef skype_detection charging-action skype_rate_limit 

C. active-charging service ACS_ACME p2p-detection protocol skype ruledef skype_detection p2p protocol = skype flow limit-for-bandwidth direction downlink peak-data-rate 32000 peak-burst- 8000 violate-action discard flow limit-for-bandwidth direction uplink peak-data-rate 32000 peak-burst- 8000 violate-action discard exit rulebase acme_rulebase action priority 1000 ruledef skype_detection 

D. active-charging service ACS_ACME p2p-detection protocol skype ruledef skype_detection p2p protocol = skype_traffic exit charging-action skype_rate_limit content-id 1500 flow limit-for-credit direction downlink peak-data-rate 32000 peak-burst- 8000 violate-action discard flow limit-for-credit direction uplink peak-data-rate 32000 peak-burst- 8000 violate-action discard rulebase acme_rulebase action priority 1000 ruledef skype_detection charging-action skype_rate_limit 

Answer: A